Traxxas led kit with mamba esc How are you guys wiring the traxxas led kit if using a diff esc other then stock if I wire a jst plug from the esc Batt it will be getting 12 plus volts and it can only had 3v on the controller box Sent from my SM-G950U using Tapatalk |
Re: Traxxas led kit with mamba esc Well first off the TRX4 8030 LED light kit requires the use of the 8028 power supply which is powered directly off a 2s or 3s battery. With the stock ESC the JST connector is a direct tap off the battery. With any aftermarket ESC you will need to provide a power tap directly from the battery. Once connected to the battery, the 8028 power supply then outputs 3v to power the LEDs. |
Re: Traxxas led kit with mamba esc Ok ya I know I ordered the 8030 so it's all of the leds I just figured if I wire a jst lead from the esc battery side it would out off more volts I didn't know the power supply regulated the power Sent from my SM-G950U using Tapatalk |
All times are GMT -6. The time now is 07:59 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com