RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Traxxas TRX-4 (http://www.rccrawler.com/forum/traxxas-trx-4/)
-   -   Proline Ford F250 Honcho Body (http://www.rccrawler.com/forum/traxxas-trx-4/611027-proline-ford-f250-honcho-body.html)

toys222 08-16-2019 09:44 PM

Proline Ford F250 Honcho Body
 
Really loving this look! Guess it's made for the SCX10, but it shares the same 12.3 wheelbase with the TRX-4.

Wondering if it would work without too much fuss?

https://uploads.tapatalk-cdn.com/201...6039a2bca5.jpghttps://uploads.tapatalk-cdn.com/201...303d91194d.jpg

Sent from my SM-G960U using Tapatalk

punkindrublik 08-16-2019 09:48 PM

Re: Proline Ford F250 Honcho Body
 
I like that a lot. The only problem I see would be the rear posts. You gonna be a guinea pig?

toys222 08-16-2019 09:56 PM

Re: Proline Ford F250 Honcho Body
 
I'm torn! I want to paint and custom fit a body, but I'm also impatient and want to drive it! Lol[emoji16]

Sent from my SM-G960U using Tapatalk

Schs2013 08-16-2019 11:28 PM

Re: Proline Ford F250 Honcho Body
 
I made this K10 body from proline work on Trx4 chassis and even the rear cage. It's do able just took some time and patience. With the Tactical units 12.8in wb. But most anything for a Scx10, Ascender, Sendero.... bodies will fit picture for you that it can be done. But i should really adjust the wheelbase to be smaller. It would look better. https://uploads.tapatalk-cdn.com/201...301c5ad13d.jpg

Sent from my FRD-L14 using Tapatalk

92fox 08-20-2019 01:16 PM

Re: Proline Ford F250 Honcho Body
 
I've been running a Honcho bed on mine for 2 years now. Essentially I removed the rear body posts, drilled a 1/4" hole in the chassis support and ran a bolt through it. I made a flatbed for the Honcho truggy cage (out of scale diamond plate then another out of .080 styrene) and drilled a hole in it that lined up with the bolt. Used a cap head but to secure the rear of the body down.

Pics on the way.

92fox 08-20-2019 01:25 PM

Re: Proline Ford F250 Honcho Body
 
Two different bodies, but same setup essentially. https://uploads.tapatalk-cdn.com/201...a677f29505.jpghttps://uploads.tapatalk-cdn.com/201...670b951a05.jpghttps://uploads.tapatalk-cdn.com/201...5d2a736f40.jpghttps://uploads.tapatalk-cdn.com/201...5799a9391f.jpghttps://uploads.tapatalk-cdn.com/201...fa9280605e.jpghttps://uploads.tapatalk-cdn.com/201...36b85eb3f2.jpghttps://uploads.tapatalk-cdn.com/201...350e81d457.jpghttps://uploads.tapatalk-cdn.com/201...0952235f29.jpg

Sent from my SM-G965U using Tapatalk

toys222 08-20-2019 02:50 PM

Re: Proline Ford F250 Honcho Body
 
Very nice 92fox! Thanks for sharing! "thumbsup"

PS - I have that same small magnetic tray - comes in handy!

92fox 08-20-2019 04:37 PM

Re: Proline Ford F250 Honcho Body
 
Quote:

Originally Posted by toys222 (Post 5957401)
Very nice 92fox! Thanks for sharing! "thumbsup"

PS - I have that same small magnetic tray - comes in handy!

Appreciate it man. Next step, I plan on a steel back half cage and some lexan cab. Unsure the exact route I am going, but I really liked my F100 body, and like the F-250 as well.

Sent from my SM-G965U using Tapatalk


All times are GMT -6. The time now is 06:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com