08-02-2018, 06:28 PM | #1 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Crawler505’s VS4-10
Here’s a look at my vs4 that is about 95% complete. First of all I have to say this rig is absolutely amazing! Everything in my kit went together smoothly without fitting issues. The electronics I went with was Castle Mamba X with a 1406 2280 kv. For the servo I had to use a Holmes Hobbies SHV500v2. As others have suggested, I put some O rings in the upper shock mounts to minimize any slop. I really love how the paint came out. The entire interior along with the top and hood scoop were treated with a flat clear. As for now, all I can do is sit and stare at it as I am waiting for my Futaba rx to show up in the mail along with the lights from rc-lighthouse. Sent from my iPhone using Tapatalk |
Sponsored Links | |
08-03-2018, 12:46 AM | #2 |
Newbie Join Date: Jul 2014 Location: norway
Posts: 16
| Re: Crawler505’s VS4-10
Great build Just completed mine. Really happy with the result. What light kit did you get from rc-lighthouse ?
|
08-03-2018, 04:08 AM | #3 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,135
| Re: Crawler505’s VS4-10
Congrats Crawler505! Nice looking rig. Paint job turned out really nice. I used the o-rings on my shock tops also. It does seem to help with keeping the shock centered. Sent from my SM-G930V using Tapatalk |
08-03-2018, 06:01 AM | #4 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: Crawler505’s VS4-10
Another great rig ! Hang up and Drive |
08-03-2018, 06:28 AM | #5 | |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 Quote:
Thanks. I when with this light kit. https://store.rclighthouse.com/10mm-light-sets/2w102r5 Sent from my iPhone using Tapatalk | |
08-03-2018, 06:28 AM | #6 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 |
08-03-2018, 06:29 AM | #7 | |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 Quote:
I agree with the o rings. Mine are going anywhere now. Sent from my iPhone using Tapatalk | |
08-03-2018, 06:29 AM | #8 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 |
08-03-2018, 06:37 AM | #9 |
Quarry Creeper Join Date: Nov 2015 Location: US
Posts: 456
| Re: Crawler505’s VS4-10
I love the color choices. pushing me towards the edge. looks great
|
08-03-2018, 07:10 AM | #10 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 |
08-03-2018, 10:24 AM | #11 |
RCC Addict Join Date: Jun 2006 Location: Durham, NC, USA
Posts: 1,164
| Re: Crawler505’s VS4-10
are those Chanquish wheels? If so, I like them
|
08-03-2018, 10:36 AM | #12 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 |
08-03-2018, 10:40 AM | #13 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Re: Crawler505’s VS4-10
I flipped the logo on the servo just so it wouldn't be upside down in a CMS install Nice looking rig! Thanks for the support! |
08-03-2018, 10:48 AM | #14 | |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 Quote:
Thanks John. Love this servo and all your products. So much torque with baby! Nice touch on the logo too! Sent from my iPhone using Tapatalk | |
08-03-2018, 11:04 AM | #15 |
Gold Star Baby! Join Date: Dec 2017 Location: Las Vegas
Posts: 2,554
| Re: Crawler505’s VS4-10
Masking lines and wiring are very clean. Nice work!
|
08-03-2018, 12:11 PM | #16 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 |
08-03-2018, 01:15 PM | #17 |
I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared.
Posts: 3,008
| Re: Crawler505’s VS4-10
This is the best paint scheme I have seen on the new Vanquish rig. Love the black contrast on that powder... Nice wheels as well That dang HH fella thinks of everything doesn't he.......
|
08-03-2018, 06:16 PM | #18 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10 |
09-19-2018, 08:48 AM | #19 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10
Just because I’m a Jeep guy I had to see... Bumpers shouldn’t be a problem, different ones should line up just fine, but the sliders are a different story. Had to take them off completely. The stock body is much wider than JK body. Going to play around with some ideas and see what I can come up with. Sent from my iPhone using Tapatalk |
10-13-2018, 08:31 AM | #20 |
Pebble Pounder Join Date: Sep 2016 Location: Rio Rancho, NM
Posts: 170
| Re: Crawler505’s VS4-10
Look what came in the mail last night!!! Got my aluminum chassis braces from VP. Pretty impressed with these! Sent from my iPhone using Tapatalk |
Crawler505’s VS4-10 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VS4 for the 1.9 noob | mikemcE | Vanquish Products VS4-10 Origin | 137 | 04-09-2020 10:01 PM |
SVT's Vanquish VS4-10 Extravaganza! | svt923 | Vanquish Products VS4-10 Origin | 136 | 11-13-2019 08:02 PM |
IN STOCK NOW!! Vanquish Products VS4-10. | RPP Hobby | RPP Hobby | 0 | 07-12-2018 06:02 PM |
Coming Soon!!! NEW Knight Customs VS4-10 Accessories! | RPP Hobby | RPP Hobby | 0 | 06-13-2018 01:23 PM |
Vanquish VS4-10 scale crawler | Teng | Vanquish Products VS4-10 Origin | 5 | 05-28-2018 06:15 AM |
| |