Circle City RC (RC Addict?) High Clearance skid for Ascender I just found this posted in a thread here on RCC, don't know much about it, but it's another cool raised link skid option for Ascenders. Saw it here in post #13: http://www.rccrawler.com/forum/vater...el-motion.html Circle City RC New high clearance skid for the Ascender https://www.facebook.com/CircleCityR...381283/?type=3 Available here on RC Addict store: https://www.ecwid.com/store/rcaddict...egory=22911205 |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender You can buy directly from circle city rc on Facebook. I actually just bought one and sold it to have him print me a custom for a front mount. Great quality. And the plastic is super slippery. Sent from my iPhone using Tapatalk |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Ive been eyeing this up for a few months. I may have to pull the trigger on this as I get hung up on "Big Body Betty's" belly often. The link risers are a plus too. What pins do you need for the links though? |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender You guys are a bad influence on me!! I just pulled the trigger on the Circle City one. He is going to include the link bolts for me. |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Quote:
I just drilled mine to fit the stock ones. They are in between the frame rails anyways so it's not gonna fall out. Sent from my iPhone using Tapatalk |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender https://uploads.tapatalk-cdn.com/201...84da1d7c2b.jpg Here is a custom skid I had him print for the same cost. $25 with link bolts. He deleted the raise for the stock trans and the 4th link mount in the front to fit the t case flat on the skid for the most room and best drive shaft angle as possible. Sent from my iPhone using Tapatalk |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Looks really nice, great setup with tranny and transfer case! Great price too. Got mounted pictures yet? |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Quote:
Sold it before I even mounted it. Went a different route with the build. Sent from my iPhone using Tapatalk |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Just bought this skid. Does someone have a pic of their link setup on K5 with this skid? Do not know if it's possible to move the links on the inside of the axle mount? |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Quote:
|
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender I am ordering one on monday, i'll let you guys know how it goes"thumbsup" |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender fitted mine today and the suspension is like a brick, no movement at all. removed some meat from the corners so the rod ends can move and still no luck! |
Re: Circle City RC (RC Addict?) High Clearance skid for Ascender Pictures? Something is probably still binding. |
All times are GMT -6. The time now is 10:40 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com