Remote Switch for LEDs with Dim function Do you have one of those crazy bright light setups on your rig? I have one and I like to use it but I don't always want it so bright that I can't look at my truck. This controller runs from a two position channel.
http://i.imgur.com/Sp6AIfC.jpg You can see it working here running a Crawler-Dad light bar on my Wraith: Remote Switch for LEDs with Dim function. - YouTube Part No. RCSWD $24 for the Remote Switch for LEDs with Dim function (receiver power) Part No. RCSWDEXT $28 for the Remote Switch for LEDs with Dim function (external power) Part No. RCSWDD $30 if you want it with a double "deans" type plug so that you can connect it between your battery and ESC for power. (external power) Lipo cutoff is available now. Protect your 3S pack from discharging too much by adding the LC option. This causes the lights to flash rapidly (if they are turned on) and the battery voltage is getting near 3 volts per cell. This adds $5 to the price of the controller. Part No. RCSWDEXTLC $33 Part No. RCSWDDLC $35 |
What a "bright" idea... Do you know a maximum amps limit for the controller? |
Re: Remote Switch for LEDs with Dim function The switching is rated for more than 10 amps, but that would be with a heat sink. Have to load it up and see what it will take to get it hot. |
Ok cool. |
Re: Remote Switch for LEDs with Dim function Added Low Voltage Cutoff option. See first post. |
All times are GMT -6. The time now is 04:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com