Two position channel, Park/Headlight controller
 

Two position channel, Park/Headlight controller
Part number: 2PPKHL

http://i.imgur.com/eCBA6rp.jpg

Use your two position channel to work your park and headlights. Both lights get receiver power (generally 6 volts) .

Each push of the two position channel cycles the output as follows:

• Off
• Park lights are on
• Park lights and headlights are on

Here's a short video showing it working:

Park and head light controller from a two position channel - YouTube

Part number: 2PPKHL $27

The picture also shows the dual power version such that the park light output gets receiver power (usually 6 volts) and the headlight output gets external power (if using 3S, about 12 volts).
Part number: 2PPKHLEXT $31

Re: Two position channel, Park/Headlight controller
 

Could this be used to toggle between my front/tail lights which will run on a 9 battery, and my 7.4v lightbar running off the receiver? My fly sky is hacked but I'd like to just be able to toggle between front/tail, front/tail and lightbar, and off.

Re: Two position channel, Park/Headlight controller
 

This would work for you if you could run both your lights from the same voltage. I could make you something custom to do what you are asking. Send me a PM if you are interested.