RCCrawler Forums

Chris_The_Battery_Man · 07-13-2011, 12:17 PM

Havent updated this thread in a while. The link is fixed. You can order now. This plug is meant to take the load off your receiver. Your servo goes into the side with all 3 wires. The BEC goes into the other side. The opposite end goes into the servo port on your receiver. You will need 1 of your ESC's to power the receiver now.

UPDATE:

BUY HERE

CreationFab - Plugs Other Receiver Bypass Adapter

jeeper_05 · 07-13-2011, 12:28 PM

I'm in! Looks clean yo!

JeremyH · 07-13-2011, 12:47 PM

Looks good. I'd be in for a few...

Jeepkid · 07-13-2011, 12:56 PM

I made something like this a while back, they work awsome. I say do it to it bro.

billet works · 07-13-2011, 01:06 PM

I'd like several of those.

chopan84 · 07-13-2011, 01:08 PM

id be down for 1

Chris_The_Battery_Man · 07-13-2011, 02:04 PM

Quote:

Originally Posted by ittybitty

Just a curiosity...would it be possible to piggyback the male into one of the female connectors so that you could eliminate the long white wire? This is what I'm talking about...

I wouldn't because that forces it to put leverage on the RX pins, and makes it less versatile to work with for multiple applications.

I am emailing the factory tonight to see what it would take to get em made. More to come.

Also, for high quantities, I would be willing to sell at a discount to dealers

ittybitty · 07-13-2011, 02:56 PM

What gauge wire are you using in yours?

Chris_The_Battery_Man · 07-13-2011, 03:46 PM

Im looking into a true 20awg silicon. Most are 22 and smaller with a pcv coating, that is really weak.

mtnhrdgr2 · 07-13-2011, 11:24 PM

i would be down for at least 3.

shelby · 07-14-2011, 01:38 AM

I'm down for 2!

bigstu · 07-14-2011, 06:44 AM

I would be interested. Right now I have a wiring mess inside my viper. I am apprehensive to cut all the harnesses and shorten them up, because I may move them.
Anyway, yes. I would take at least 1..

92LILREDYJ · 07-14-2011, 08:45 AM

What about making a 2x2s to 4s balencer adaptor? I have not seen any of these around. I found 6s everywhere. but no 4s.

I like this connector to!

Chris_The_Battery_Man · 07-14-2011, 10:43 AM

Quote:

Originally Posted by bigstu

I would be interested. Right now I have a wiring mess inside my viper. I am apprehensive to cut all the harnesses and shorten them up, because I may move them.
Anyway, yes. I would take at least 1..

I know a guy that can help your wiring mess out

Custom Soldering/wiring

Quote:

Originally Posted by 92LILREDYJ

What about making a 2x2s to 4s balencer adaptor? I have not seen any of these around. I found 6s everywhere. but no 4s.

I like this connector to!

There isn't much demand for something like that, otherwise, it would already exist.

Chris_The_Battery_Man · 07-19-2011, 01:46 PM

Looks like theres a solid chance I am getting these in. Once I get the final word, I will accept pre-orders

TSK · 07-19-2011, 03:03 PM

Quote:

Originally Posted by Chris_The_Battery_Man

Looks like theres a solid chance I am getting these in. Once I get the final word, I will accept pre-orders

I'm down.

03kjrocky · 07-20-2011, 04:05 PM

I would be in for a couple also,I will keep a eye on this thread

Onebdgti · 07-20-2011, 07:43 PM

Im in for about 3-4 of these maybe even more.

BGGruff · 07-20-2011, 08:20 PM

I like it, I need a few.

version_three · 07-20-2011, 08:54 PM

I'd def. be down for one or two of em.

07-13-2011, 12:17 PM	#1
Chris_The_Battery_Man I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR Posts: 2,078	Receiver bypass adapter Havent updated this thread in a while. The link is fixed. You can order now. This plug is meant to take the load off your receiver. Your servo goes into the side with all 3 wires. The BEC goes into the other side. The opposite end goes into the servo port on your receiver. You will need 1 of your ESC's to power the receiver now. UPDATE: BUY HERE CreationFab - Plugs Other Receiver Bypass Adapter Last edited by Chris_The_Battery_Man; 03-26-2012 at 11:40 PM.

07-13-2011, 12:28 PM	#2
jeeper_05 RCC Addict Join Date: Jun 2005 Location: Prosser Posts: 1,278	I'm in! Looks clean yo!

07-13-2011, 12:47 PM	#3
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Looks good. I'd be in for a few...

07-13-2011, 12:56 PM	#4
Jeepkid I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN Posts: 3,197	I made something like this a while back, they work awsome. I say do it to it bro.

07-13-2011, 01:06 PM	#5
billet works I wanna be Dave Join Date: Jun 2007 Location: Earth Posts: 2,488	I'd like several of those.

07-13-2011, 01:08 PM	#6
chopan84 Quarry Creeper Join Date: Feb 2011 Location: Princeton Illinois Posts: 477	id be down for 1

07-13-2011, 02:56 PM	#8
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	What gauge wire are you using in yours?

07-13-2011, 03:46 PM	#9
Chris_The_Battery_Man I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR Posts: 2,078	Im looking into a true 20awg silicon. Most are 22 and smaller with a pcv coating, that is really weak.

07-13-2011, 11:24 PM	#10
mtnhrdgr2 Quarry Creeper Join Date: Aug 2008 Location: San Jose Posts: 250	i would be down for at least 3.

07-14-2011, 01:38 AM	#11
shelby RCC Addict Join Date: Jul 2009 Location: Santa Rosa, CA Posts: 1,349	I'm down for 2!

07-14-2011, 06:44 AM	#12
bigstu RCC Addict Join Date: Mar 2010 Location: Auburn, MI Posts: 1,177	I would be interested. Right now I have a wiring mess inside my viper. I am apprehensive to cut all the harnesses and shorten them up, because I may move them. Anyway, yes. I would take at least 1..

Sponsored Links

07-14-2011, 08:45 AM	#13
92LILREDYJ Rock Crawler Join Date: Dec 2009 Location: Beaumont, Tx Posts: 507	What about making a 2x2s to 4s balencer adaptor? I have not seen any of these around. I found 6s everywhere. but no 4s. I like this connector to!

07-19-2011, 01:46 PM	#15
Chris_The_Battery_Man I wanna be Dave Join Date: Oct 2006 Location: Milwaukie OR Posts: 2,078	Looks like theres a solid chance I am getting these in. Once I get the final word, I will accept pre-orders

07-20-2011, 04:05 PM	#17
03kjrocky Pebble Pounder Join Date: Mar 2007 Location: Vancouver,BC,Canada Posts: 183	I would be in for a couple also,I will keep a eye on this thread

07-20-2011, 07:43 PM	#18
Onebdgti Rock Crawler Join Date: Jul 2010 Location: St. Albans Posts: 507	Im in for about 3-4 of these maybe even more.

07-20-2011, 08:20 PM	#19
BGGruff RCC Addict Join Date: Mar 2007 Location: MS Gulf Coast Posts: 1,949	I like it, I need a few.

07-20-2011, 08:54 PM	#20
version_three Rock Crawler Join Date: Apr 2010 Location: Central FL Posts: 509	I'd def. be down for one or two of em.

RCCrawler Forums

Thread: Receiver bypass adapter