2.8" bead lock wheel for Traxxas or ???
 

Thought some of you might have an application for these. They were designed for a Traxxas Jato which is a 2wd rc so the back wheels have your basic 12mm hexes and the front wheels use bearings. I can definitely sell 4 wheels with hexes.

As always be sure to contact Motoworx for your custom needs

Specs:
overall diameter 3.2"
Tire diameter is 2.8"
Width is 1.8" before bead locks

See more here.
http://www.motoworxracing.com/traxxasrc.htm

http://www.motoworxracing.com/5split3.jpg

Would these wheels fit a traxxas stampede 4X4?"thumbsup"

stampede
 

Yes, I believe so. You would just need four rear wheels instead of 2 rears and 2 fronts.

If you could find out for sure I might be interested in a set.I know the require alot of room behind the wheel due to 4 wheel drive.

I could send you a wheel out and you could test it but you would have to send it back to me. Or you could send me a wheel and your linkage.
Thanks
Jake

I have the stock wheels on my truck.I could test the fitment if thats something you want to do.I like the look and beadlock style wheel so if they would work it would be pretty awesome.

As long as they are a 12mm hex they should fit. If you think your linkage and steering knuckles are different than a Jato than we should check. The diameter of the inner wheel well on this wheel is no less than 2.5".
I am sure hex works because traxxas list that there 2.8 wheel works for Jato, Rustler, and Stampede. http://traxxas.com/products/parts/ti...28ChromeWheels

Initial test have come back and report that the bead holds outstanding.
Jake

Yea the stampede 4x4 has much larger axle carriers.I could send you some photos of the clearence with the stock wheels once I get home from offshore.

updated design
 

Hi, modified these to be a split 5 spoke design.
jake@motoworxracing.com
motoworxracing.com