03-01-2010, 08:57 PM | #1 |
I wanna be Dave Join Date: Nov 2008 Location: Where freedom is earned.
Posts: 2,011
| 2.2 bodied question
How much of the body has to be 3" tall down the sides. If a person using a Mantis chassis competes, will 3"'s at the front, (following the chassis shape) for 2-3" qualify? 2nd? If the body is 5"s wide "off" the chassis but pulled in to Narrow it using body posts, is "that" legal? |
Sponsored Links | |
03-02-2010, 05:26 AM | #2 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| Search Button! One of your questions was answered just 2x threads below yours! |
03-02-2010, 03:36 PM | #3 | |
I wanna be Dave Join Date: Nov 2008 Location: Where freedom is earned.
Posts: 2,011
| Quote:
I DID SEARCH, I read that post already, thats why I asked mine. I READ the RULES, and it doesn't say how much of the body side has to be 3"s down on the sides. If I were to use a Mantis style chassis, the body would be drastically cut upwards but "PART" of each side would extend 3"s down. That's what I want clarified. The rules state that the body width must be 5"s wide, the "standard" grappler IS 5"s wide, but on one of my chassis' I pull it in closer with body posts. That's the actual 2nd question. IF it's already legal but pulled in under 5"s can it be used. It is merely for a tire rub issue, not to gain any advantage. | |
03-02-2010, 04:12 PM | #4 |
I wanna be Dave Join Date: Feb 2004 Location: on a Big Rock
Posts: 7,837
| All tech inspections are done with the vehicle RTR Note: All vehicles will be teched in the same ready to run condition, and set up as the vehicle will be run on the course. Last edited by Fishmaxx; 03-02-2010 at 04:16 PM. |
03-03-2010, 04:56 AM | #5 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
| |
03-03-2010, 01:13 PM | #6 | ||
I wanna be Dave Join Date: Nov 2008 Location: Where freedom is earned.
Posts: 2,011
| Quote:
Quote: | ||
| |