RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   XTM Crawler (http://www.rccrawler.com/forum/xtm-crawler/)
-   -   x-crawl moonbuggy (http://www.rccrawler.com/forum/xtm-crawler/166316-x-crawl-moonbuggy.html)

gadge 03-10-2009 01:19 PM

x-crawl moonbuggy
 
while tryin to figure out how to bulletproof my trans n dogbones thought
i would make it a tuber..just got some more flat stock for susp mounts
f.y.i. runnin 2 65t mtrs w/crawler esc,5955 servos cc bec savage super shocks,moab xl's on axials
well heres the chassis so far..made from 5/32 & 1/8 soild rod
not really scale but thought it looked cool n close enough
http://i240.photobucket.com/albums/f...3/DSC00486.jpg
http://i240.photobucket.com/albums/f...3/DSC00483.jpg

scubadaveojr 03-10-2009 06:41 PM

that is funky looking.... not to scale in my eyes but might work good a comp tuber...

kasper 03-11-2009 08:42 AM

its hard to see the finished product unless your the builder lets see some more pics as the build proghresses

gadge 03-15-2009 08:54 AM

first of all this is not scale section...but heres 1:1's
http://i240.photobucket.com/albums/f...526_edited.jpg
http://i240.photobucket.com/albums/f...RA_uuu4476.jpg

Robbob 03-15-2009 01:47 PM

http://i240.photobucket.com/albums/f...526_edited.jpg

anyone notice the name on the rear lower link? :lol::lol:


but frame looks good "thumbsup"

The Violator 04-12-2009 12:15 AM

That really cool. Get it done so we can see some pics

gadge 04-15-2009 10:21 PM

got to do a little more,re-paint is on the list,want to do a belly pan with links exiting in a X shape and recessed into UHMW skid
still not sure if this is what i want to run in this summers "Super",if not..i gotta pull the electronics for other super..revo based
well here it is as of now(mocked up w/ 5"mugen buggy shocks and l..o..n..g wheelbase of 18" shorter w.b. gives me quite a but more G.C.
still need a couple more things,and to figure out a few more,like if i want to run a shorter tire on 0 backspace wheel like original
well here
http://i240.photobucket.com/albums/f...3/DSC00695.jpg

i2oadsweepei2 04-17-2009 07:37 PM

Nice job so far, Can I ask, is the wheel base same as stock or longer/shorter?

More pics please :)

Kev

gadge 04-17-2009 08:42 PM

longer with this set up,pretty much maxxed out at 18"
http://i240.photobucket.com/albums/f...3/DSC00692.jpg
rear view,the lower links are bent and are attached at the stock location along with the shocks,really didnt like stock mount,it would rotate n side load the shock shafts
rear upper link is the only one not hooked up right now..little short of stock location as pic'd.i can make new mount or change link lenght to fit .i already have longer and shorter aluminum 4mm rod ends, to eliminate some of the cone/washers that are needed with stock if you want any movement
also thinking about revo and jato rod ends,gotta love those, so many combinations,balls especially!
http://i240.photobucket.com/albums/f...3/DSC00696.jpg
really need front view dont i...im pretty happy with the integy stampede wheel adapters, to 17mm, well 1/2 happy they come in two different widths,the shorter ones give me a track width of 16" with axial B'locks n moab xl's
without spacers just regular 17mm hubs rear width is only 13 3/4"
same tire wheel combo on a revo is almost 18"!!
ive got a set of t/e maxx size on wheels with 0 backspacing im gonna throw on think they are offna race something..bright yellow... be ready

revo-4tec-mike 04-18-2009 08:21 AM

how are the moab xl's compared to the x-crawler stock tires traction wise.
ive been thinking of getting a new set of tires for a back up and have not tried the xl's yet

gadge 04-18-2009 09:28 AM

side wall is much softer so there is quite a bit more what ill call tread slide ..where the rig pushes the tire sideways..so side hillin is a little tricky..4ws helps that though..
i run my own foams..dual density,helps a little
but as far as climbing rocks like night and day...id say twice as capable to conform to the terrain..ive got a ton of BB's in there also so they are heavier they are also a little taller ive got two new sets now for summer
woo.. hoo... real rocks again
ive got a set of imex red rocks on a 0 ofset wheel ...a little taller than xtm's im gonna try also,pics soon but busy now

i2oadsweepei2 04-18-2009 08:28 PM

Can't wait to see more pics :) I have a set of Moab XL's with Cheyenne narrow beadlocs that I have started to narrow a little more maybe 1/2 to 3/4 inch not sure yet. They were from an old tuber with txt axles project. 23mm though. I think one of the venders was making 14mm to 23mm delrin adapters.

BTW the side view with the moabs on looks great "thumbsup" How much clearance are you expecting when it's done? Just curious.

Kev


All times are GMT -6. The time now is 05:33 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com