New Bright 1/6 jeep

[dieselfuel]

that doesn't help steve...

 

[dieselfuel]

i got mine tonight!

let the building begin!

 

[ddiaz10240]

does any one have the inside bumper to bumper dimension? i'm finishing up my chassis and just want to double check the length.

 

[STANG KILLA SS]

The JK is 1/8 and has a wheelbase of 13".

ahhh no wonder, then i was right."thumbsup"

 

[maxxa87]

What the width from outside of the flaires one side to the other on the 1/6 and 1/8? Thanks in advance.

 

[Lobonyc]

Got one also...

Got one also...

Velcro'd to top battery plate on ax10

planning on getting 1.9 wheels for scale look and a little more fender clearance.

might consider xtrail chassis...but still up in the air.

 

[maxxa87]

So how wide is the body?

 

[AeroSynch]

So how wide is the body?

9".

With 1.9's, whoever asked:

 

[maxxa87]

That is from outside of one flare to the other right? From what i've read, ax-10 axles are 8 5/8 inches wide and it looks like the body is more than 3/8 of an inch wider than the axles. With the 1.9s, it doesnt even look like the tires stock past the flares.

 

[wyocrawler]

"planning on getting 1.9 wheels for scale look and a little more fender clearance."

i would stick to the 2.2, makes it look like your running 40's instead of 33 inch tires."thumbsup"

 

[TRX 90]

can somebody tell me the specs of the body?

WIDTH:
LENGHT:
WHEELBASE:

 

[maxxa87]

I figured out its really close 1/9 scale. The 1:1 has a 116" wheelbase compared to the bodies 13" wheelbase. That puts 4.5" tall Flat Irons at a scale 40" tire. The RC4WD rock crushers that are 5.5" tall would be like 49s!

 

[Robb]

All RC manufacturers are a bit off on their scale variables...............and New Bright is about on the top of the list.

I have a New Bright 1:6 F150 Lightning body here, that I bought planning around a build planned for 1:6 scale.................just to find out that the WB sits dead at 1:8 scale.

 

[sixshooter]

That is from outside of one flare to the other right? From what i've read, ax-10 axles are 8 5/8 inches wide and it looks like the body is more than 3/8 of an inch wider than the axles. With the 1.9s, it doesnt even look like the tires stock past the flares.

That just means it will pass inspection here in PA right? Tires can't stick out past the flares...

 

[JLF]

These are great! I cant believe how cheap they are....

I got a New Bright Land Rover LR3, and the body looks amazing.

I actually tore it all apart just to see what mods I could do to the original rig... as kinda a fun waste of time. Just see what could be done with it.

I guess thats a topic for another thread though!

 

[Waldo76]

hey guys are these rc trucks or just toy trucks? never mind i found them gooing to have to pick one up

 

[Osco]

JK scale jeep

I cannot find a web link for this JK jeep I would love to have that body :XD

 

[Osco]

:shock:

I cannot find a web link for this JK jeep I would love to have that body :XD

 

[chris20620]

Got one also...

Velcro'd to top battery plate on ax10

planning on getting 1.9 wheels for scale look and a little more fender clearance.

might consider xtrail chassis...but still up in the air.

hello​

where did you buy the body jeep​

 

[lwarc]

New bright FJ

I just ordered a 1:10 scale New Bright Toyota FJ for $50 so I can Start a scale build. I ordered it from www.target.com, has anyone built a scaler for this body? I was thinking of using the XTrail or maybe scx10 chassis.