T1E ''Ti Fighter''

[86jeep]

what Gauge wire is that in there?

I think it's 18 maybe 20, The package said 2mm

Could you share that information? I'd like to add more weight to my Eggressor system. "thumbsup"

You half to drill the center bigger 953995a270 and 95395a360 from Mc master carr.

Judging by the wink, I'm sure you know what the droid is but anyway for everyone else . . .

http://www.rccrawler.com/forum/showthread.php?t=255520&highlight=droid

As far as the killing. . . well the Ti's certainly went far over the top. . . . and politics.

"thumbsup"

The Droid killer on your hood makes me laugh

I did to:mrgreen:.

 

[JeremyH]

Hey Greg, are you running the Hyperion 450mAh 3S 25C packs? If so, what runtime do you get off of them with brushed motors?

 

[86jeep]

Hey Greg, are you running the Hyperion 450mAh 3S 25C packs? If so, what runtime do you get off of them with brushed motors?

Yes, but im running puller's. I get around 10min not sure with a 540 motor. I now it would be longer than 10min though.

 

[JeremyH]

Good deal. Thanks for the info! "thumbsup"

 

[bigjeff1313]

So your battery sticks on the back of your servo? If so did you put a strap around it or just stick it on?

 

[Krawler Kev]

Hey Greg, are you running the Hyperion 450mAh 3S 25C packs? If so, what runtime do you get off of them with brushed motors?

A guy in our club has ran those batteries and was getting 14min of crawl time before lipo cut off."thumbsup"

 

[House]

You half to drill the center bigger 953995a270 and 95395a360 from Mc master carr.

FYI, in case someone is actually looking, that is one too many 9's on that
first part number. It should read 95395a270.

 

[86jeep]

FYI, in case someone is actually looking, that is one too many 9's on that
first part number. It should read 95395a270.

Thanks

 

[SDS Customz]

Hey Greg, are you running the Hyperion 450mAh 3S 25C packs? If so, what runtime do you get off of them with brushed motors?

Ive ran them with 540's and you get between 11-13.5 min depending on how hard you push them, or how much you have to right your truck.

The Droid killer on your hood makes me laugh

The laugh is more heart felt for those of us that know all of the history.8)

 

[86jeep]

Got to love a lite truck and wheel speed :mrgreen:

 

[JeremyH]

Ive ran them with 540's and you get between 11-13.5 min depending on how hard you push them, or how much you have to right your truck.

Haha....thanks! "thumbsup"

 

[EGRESSor]

Got to love a lite truck and wheel speed :mrgreen:

you have to post a video

very nice rig Greg"thumbsup"

 

[sally1800]

Got to love a lite truck and wheel speed :mrgreen:

:ror:

Nice pic but did you land it Hot Rod?

 

[Dr.Frank]

Got to love a lite truck and wheel speed :mrgreen:

Yippie-Ya-Yeah, SDS Customs making helicopters :mrgreen:

BTW, how did you compensate the bad starting point of the pullers? I think it's about ten times higher than on a good handwounded 540, lets say a 540 has 0.4V and a Puller has about 4V.

Greetings Frank

 

[86jeep]

you have to post a video

very nice rig Greg"thumbsup"

Thanks,We got a comp next weekend maybe somebody will bring a Video camera.

:ror:

Nice pic but did you land it Hot Rod?

"Land it":roll:, It rowed a wheel of the back side for 2 or 3 ft 8)

Yippie-Ya-Yeah, SDS Customs making helicopters :mrgreen:

BTW, how did you compensate the bad starting point of the pullers? I think it's about ten times higher than on a good handwounded 540, lets say a 540 has 0.4V and a Puller has about 4V.

Greetings Frank

It did do very nice perawet of one rock.
Holmes Hobbies hooked me up with some 16t slotted arm one's. There not as smooth as 540s but pretty close. Its like running the old Tekin software on 540's acouple of year's ago.

 

[86jeep]

Made a Old school Rockshow cab :mrgreen:.

 

[4xFord]

Looks cool I like it, looks like a truck. "thumbsup"

 

[86jeep]

Looks cool I like it, looks like a truck. "thumbsup"

Thanks, It's differant .

 

[Rock Logic]

Made a Old school Rockshow cab :mrgreen:.

hah i thought i was bad

 

[Rock Logic]

Made a Old school Rockshow cab :mrgreen:.

i think your hiding something"thumbsup"