PinchFlat
Say hello to my dactylion
No Problem... "thumbsup"
Thanks... This build has 3/16", 1/8" & 3/32" cage work.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
PinchFlat’s MSD Scale Nats TTC Entry - Sami Buggy
- Thread starter PinchFlat
- Start date
I thought we covered this......Pinch and Kaetwo are the same person. :roll:
I love that "you guys" are so confident you are going to enter TTC with the 4.7" tires. I hope these rigs kick ass!! Nice work. "thumbsup"
PinchFlat
Say hello to my dactylion
hell yeah!!!!!
boob dude
Rock Crawler
Where are the updates??? But I understand if ur working on my Montana class 2 rig. How about updates on both. :ror:
PinchFlat
Say hello to my dactylion
I have been on my death bed for a week... BLAHHH!!!
boob dude
Rock Crawler
I have been down all week to, maybe area 51 got me sick, but it was worth it "thumbsup"
miniwheeler
Rock Crawler
Very nice "thumbsup" Im Diggin the little giant killer idea for a TTC rig
PinchFlat
Say hello to my dactylion
Hell YEAH!!!"thumbsup"
As it sits its about right at a hair under 12"
We are trying something new. Where going to take apart a 4C lipo and squeeze the goo into the tube cage. Then run a balancer plug and the pos/neg leds and wala!!!!
I predict that it will burn to the ground, but whatever.
8)
hotwheels000
I wanna be Dave
Proof of concept ? Go to market strategy ???
Come on pinch,you know how to market better than that.... Wanna buy a bridge over troubled waters in the desert ???:mrgreen:
PS : I need a WETARD grill for the Washington surprise build,can you help a brother out ? 4"x3" please8)
PinchFlat
Say hello to my dactylion
We were also thinking of molding in (2) seat shaped 2c seats and wire them together for 4c bats.."thumbsup"
WETARD huh? :ror:
WETARD huh? :ror:
i think the seat thing would work you could possible add some stock tire foam to kinda form the seat and shape it use a 2s for each seat dude i think that would work it may raise ur cog too much tho..but good idea man.."thumbsup"
miniwheeler
Rock Crawler
If you clamp a 2s lipo in the vise you can bend the bottom 3rd and make a nice low back bucket and the balance tap can hide in the center console 
Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)
Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)
XSRCdesign
I wanna be Dave
If you clamp a 2s lipo in the vise you can bend the bottom 3rd and make a nice low back bucket and the balance tap can hide in the center console
Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)
I seriously laughed out loud...
If you clamp a 2s lipo in the vise you can bend the bottom 3rd and make a nice low back bucket and the balance tap can hide in the center console
Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)
That's just silly :lol:
hotwheels000
I wanna be Dave
Balance taps make great seat belts when pluged into each other 180* out of phase;-)
I just got done trying this and oddly enough the batteries blew up and almost burned down my garage.
Are you sure this works?
8)
