• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

PinchFlat’s MSD Scale Nats TTC Entry - Sami Buggy

ok i just figured it out the 3 link allows axles to have movement side to side the pan hard eliminates that wow..i cant believe it took me that long to realize what the hell i was thinking lol...if you could still post a pic of ur front panhard it;ll help out im having lots of trouble with this stuff..thanks man and sorry i wasted ur time in the previous post:lmao:
No Problem... "thumbsup"

X2!

PinchFlat-
Mind sharing what size tube or rod you are using for this?

It looks awesome - fantastic job!
Thanks... This build has 3/16", 1/8" & 3/32" cage work.
 
Looks great, but I'm only going to vote for one of you guys......now which one will it be?

I'll pm both of you with my paypal :mrgreen:.

I am voting for both of the tards....not voting for piggy, he is mean:mrgreen:

Looks good pinch
I thought we covered this......Pinch and Kaetwo are the same person. :roll:

I love that "you guys" are so confident you are going to enter TTC with the 4.7" tires. I hope these rigs kick ass!! Nice work. "thumbsup"
 
i searched this thread and dont see it anywhere whats the wheelbase on this monster:twisted:
 
wow thats just a tad longer than the dingo wb..and where in the world are y'all gonna put ur batt. if ur running a 4s thats gonna take some room
 
wow thats just a tad longer than the dingo wb..and where in the world are y'all gonna put ur batt. if ur running a 4s thats gonna take some room

We are trying something new. Where going to take apart a 4C lipo and squeeze the goo into the tube cage. Then run a balancer plug and the pos/neg leds and wala!!!!

I predict that it will burn to the ground, but whatever.

8)
 
We are trying something new. Where going to take apart a 4C lipo and squeeze the goo into the tube cage. Then run a balancer plug and the pos/neg leds and wala!!!!

I predict that it will burn to the ground, but whatever.

8)
Proof of concept ? Go to market strategy ???

Come on pinch,you know how to market better than that.... Wanna buy a bridge over troubled waters in the desert ???:mrgreen:

PS : I need a WETARD grill for the Washington surprise build,can you help a brother out ? 4"x3" please8)
 
i think the seat thing would work you could possible add some stock tire foam to kinda form the seat and shape it use a 2s for each seat dude i think that would work it may raise ur cog too much tho..but good idea man.."thumbsup"
 
If you clamp a 2s lipo in the vise you can bend the bottom 3rd and make a nice low back bucket and the balance tap can hide in the center console :afro:

Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)
 
If you clamp a 2s lipo in the vise you can bend the bottom 3rd and make a nice low back bucket and the balance tap can hide in the center console :afro:

Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)

I seriously laughed out loud...
 
If you clamp a 2s lipo in the vise you can bend the bottom 3rd and make a nice low back bucket and the balance tap can hide in the center console :afro:

Better yet smash it between 2 1 inch steele plates with a 50 ton press and fashon a floor pan 8)

That's just silly :lol:
 
Yeah it works great and looks really scale and nice lol that's hilarious


Sent from my iPhone using Tapatalk
 
Back
Top