• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

GT3B Hack Question and Answer Thread

vette66_00 said:
sub menu rev 3 4WS, NOL, 1%, NOR, NOO
Click to expand...

Why a 1% step rate, shouldn't it be 100% ?

Steering Front is plugged into Channel 2
Steering Rear is Plugged into Channel 4
Click to expand...

CH 2? CH 1 is steering Ch 2 is th


Only thing I would like to see on this is in the main menu under TRIM to have the ability to trim the other channels not just 1 and 2. I had to adjust the linkage to accommodate the lack of trimming the back servo, it still not perfect but it works.
Click to expand...

Sub-trim my friend, long click on trim "thumbsup"
 
losikid said:
Why a 1% step rate, shouldn't it be 100% ?



CH 2? CH 1 is steering Ch 2 is th




Sub-trim my friend, long click on trim "thumbsup"
Click to expand...

Sorry your right it is Channel 1. I don't think it matters since the 1% is the step if using a button. I will change it to see. trying sub trim.

EDIT:

1% or 100% doesn't matter. SUB TRIM is my new friend that worked very well. Thanks
 
Last edited:
vette66_00 said:
Sorry your right it is Channel 1. I don't think it matters since the 1% is the step if using a button. I will change it to see. trying sub trim.

EDIT:

1% or 100% doesn't matter. SUB TRIM is my new friend that worked very well. Thanks
Click to expand...

Yea mine didnt work on 1%. Works on 100% "thumbsup""thumbsup"

Now if i could get my C3 rig done. LMAO
 
vette66_00 said:
Sorry your right it is Channel 1. I don't think it matters since the 1% is the step if using a button. I will change it to see. trying sub trim.

EDIT:

1% or 100% doesn't matter. SUB TRIM is my new friend that worked very well. Thanks
Click to expand...

At 1% though it should slowly mix f/r like proportional mixing on esc (same thing, just diff channels) at 100% you should go only rear, mix, only front...i'm gonna brake out my gt3b now to see.
 
So I ordered one of these radios tonight based on the fine work of all of you :)

I will be getting the hack kit in the next few weeks so I can dig in (HA) and get to work playing with it!

I will have questions, and I will be coming either here, or over on RCtech as I am going to register there too, for asking the experts :)

Silly quick question, will this hacking work for the Turnigy 9x radio? I already have that one....

Thanks for the inspiration guys! and I look forward to learning a lot with you!

-Mike (Ravenseye)
 
Ravenseye said:
So I ordered one of these radios tonight based on the fine work of all of you :)

I will be getting the hack kit in the next few weeks so I can dig in (HA) and get to work playing with it!

I will have questions, and I will be coming either here, or over on RCtech as I am going to register there too, for asking the experts :)

Silly quick question, will this hacking work for the Turnigy 9x radio? I already have that one....

Thanks for the inspiration guys! and I look forward to learning a lot with you!

-Mike (Ravenseye)
Click to expand...

I'm happy to answer any questions you throw at me.

As for the 9x, no this hack kit will not work with it, however i can get you hooked up with a solder-free programmer and er9x (new firmware) for you. Just send me a email, losikid@overkillrc.com
 
Ok the bug for trim has been solved, a new firmware release will be out soon.

Also i found out a new feature for the gt3b, use it as the controller on video games such as motorm4x

I'll be getting details worked on later, as there's stuff i want to experiment with.
 
losikid said:
Ok the bug for trim has been solved, a new firmware release will be out soon.

Also i found out a new feature for the gt3b, use it as the controller on video games such as motorm4x

I'll be getting details worked on later, as there's stuff i want to experiment with.
Click to expand...
Ive seen others use that B4 but Ive never bothered to try it as I wasnt sure it still worked with the new firmware.
Do you happen to know of the Hk T6a V2 will work with the PC with the USB programing cord for it? Ive been curious about heli's and figured I would try a trainer/sim program
 
spoo76 said:
Ive seen others use that B4 but Ive never bothered to try it as I wasnt sure it still worked with the new firmware.
Do you happen to know of the Hk T6a V2 will work with the PC with the USB programing cord for it? Ive been curious about heli's and figured I would try a trainer/sim program
Click to expand...

It should, you may have to buy a sim cable though for it...they're cheap
 
losikid said:
It should, you may have to buy a sim cable though for it...they're cheap
Click to expand...
Assuming its the same as the programing cable I already have it. looks like a PS/2 to USB. Ill Google it and see if it needs any drivers
 
JokersWild said:
Wondered how long it would be till you just started selling them already hacked.
"thumbsup"

Still cheaper then DX3C :lmao:


Hey and Austin. What would you call the cord the plugs into "DSC" for gaming?
Click to expand...

I'm also working on a custom gt3b builder. Which will allow all the buttons to be moved, and possible transformed into other kinds of switchs. However i am still experimenting to get a better understanding of how it all works, so i can make options as universal as possible. However a custom build will range from 150-250+


Cheaper than just about any computer radio, besides other chinese ones.

i have no clue what the cord would be called...some sort of simulator cable that takes the ppm output of the radio, and translates it so the computer can read it.
 
just Flashed the new 4.0 firmware. Works fine under XP mode so long as its plugged in correctly :lmao:
 
Got some batteries for my Tx this evening...about 15 min later I was done with the Hack N Flash ,and ready to start the setup.
Kick Ass product

Will try mapping all the buttons tomorrow when I get a few servos hooked to the RX.

Thanks
 
You must log in or register to reply here.

Similar threads

Greatscott
Flysky - Fail
Replies
10
Views
1K
TacoCrawler
T
jebster
Jebster's XX10 T-REX
Replies
8
Views
2K
jebster
jebster
JatoTheRipper
Vanquish VRD Stance RTR
2
Replies
33
Views
7K
Col_Sanders
Col_Sanders
G
Flysky Noble transmitter questions - trim switch operation
Replies
0
Views
1K
garyk
G
S
4WS with Spektrum DX5C frustrations
Replies
10
Views
3K
SMT_Digger
S
Back
Top