how to prevent tires coming out off the beadlocks

[painter4x4]

how do you guys mount the tires on beadlock wheels?
in my case it came loose at a high speed turn. my setup is tekin rs pro, redline 13.t, stock gearing. currently using stock ripsaw r35 tires from kit, mounted on cr01 beadlocks wheels with tamiya aluminum beadlocks.

i have vanquish star wheels on the way, will it solve my problem? or i should do extra precautions like gluing tires? but how?

thanks.

 

[ussprinceton2004]

..some guys are having tires pop off on their VP wheels: http://www.rccrawler.com/forum/axial-wraith/358352-ripsaws-slw-v4-losing-bead.html

 

[stpete40]

Get a set of Motoworx Beadlocks. No lost beads. They are the opposite of Super Light Weight though. Extra beef with these.

 

[painter4x4]

Thanks for the replies guys, but getting another set of wheels is not an option for now since i already bought a vp szz star. What should i do to prevent loosing thread? Is gluing tires to an aluminum wheels is acceptable? Will a super glue stick on the aluminum of the wheels?
Another option is if ill change my ripsaw to proline tsl swamper, will it solve the problem?

 

[stpete40]

Superglue should help them stick enough to solve the problem, unless the clearance is completely out of spec on the wheels/rings.

 

[Scott105]

Clear silicone should bond to both and be fairly easy to remove if you want to disassemble the tire and wheel without damage or heavy cleanup of the residue. I have a tube on hand but surprisingly have not lost a bead and had to use it.

 

[painter4x4]

Clear silicone should bond to both and be fairly easy to remove if you want to disassemble the tire and wheel without damage or heavy cleanup of the residue. I have a tube on hand but surprisingly have not lost a bead and had to use it.

thanks! i will try this first to my ripsaw on cr01 wheels. the silicone must be put on the side of the ring or on the wheels side?