if you dont have a big black capacitor sticking out one end of your bec, you have an older one that alot of people had issues with burning up. ive had i think 3 of the pre-cap castle 10amp bec's fail since i started pushing my trucks way harder than i used to. they will act up and glitch, and then just stop working.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
NIRC. Chit Chat
- Thread starter sally1800
- Start date
if you dont have a big black capacitor sticking out one end of your bec, you have an older one that alot of people had issues with burning up. ive had i think 3 of the pre-cap castle 10amp bec's fail since i started pushing my trucks way harder than i used to. they will act up and glitch, and then just stop working.
johnnyh66
Scale Detail Engineering
CC 20amp BEC on the way :x
JAS82
Newbie
Got the new one it has the black cap ill remove the BEC to see if it works better. Im out for sat dont know whats going on remove the BEC same shit:x. Ill give it a try tomorrow see if I can get it running
Last edited:
Die-Laughing
RCC Addict
Yeah, I actually posted pictures of my new wheels with cut & shuts on them last night but, accidentally posted it in the TF2 thread so, I deleted it but I forgot to post it in the other thread. Meh. Chit happens.
Die-Laughing
RCC Addict
check out these knuckle weights!
http://www.rccrawler.com/forum/1-9-scale-rigs/375820-szczerbas-f-toy-744-a-4.html
http://www.rccrawler.com/forum/1-9-scale-rigs/375820-szczerbas-f-toy-744-a-4.html
those are dope!
i was sold on the bluemonkey weights/design until i saw the price.
the highlift is going to get an electronics rebuild.
the existing setup is waaay over complicated and just a mess after i bandaided the damage after the fire at busse. i have the bec and novak lipo shutoff for the ancient super rooster all tapped into the winch wiring in between the servo and receiver, i think there is some funky electrical voodoo happening by having all those components tapped together in the wiring harness that is lunching out my winches as a result.
just look at this mess...
the existing setup is waaay over complicated and just a mess after i bandaided the damage after the fire at busse. i have the bec and novak lipo shutoff for the ancient super rooster all tapped into the winch wiring in between the servo and receiver, i think there is some funky electrical voodoo happening by having all those components tapped together in the wiring harness that is lunching out my winches as a result.
just look at this mess...
Thanks
Door handles will be black so there will be some detail
I figure the back section is all black. Might be to much black.
Hey guys just giving y'all the heads up first. I am probably going to sell my rigs a lightly used wraith and my TTC truck. My son is really getting in to motor crossing and I need to buy a bike to keep up with him. Thought I would let you guys know first before I post them in the for sale section.
Everybody has a black truck...or silver or army green...I think the red looks sweet!
What is your TTC truck? You got a thread on it? What about your sled? What are you doing with it? You want to sell it? I need it!!
Last edited:
No thread on the truck just a bulletproof scx10 with a takin 45 t motor and esc and bec. Got a modded Betty body with a wild willy driver. Built Axel's with tubes and lockers also a futaba 4pl. As far as the sled it might as go as well.
Guys, $250 is a little out of my range for a sled we're going to use once a year and he's not going to budge on the price...I tried, ha. You guys want to take up a collection for it? Make it a club owned item or is that asking for trouble?
Edit: we'd make Jason the sled's keeper because he cleans his rigs more than anyone! Ha.
Edit: we'd make Jason the sled's keeper because he cleans his rigs more than anyone! Ha.
Honestlyunless one person wants it, it is tough to pool in for it, I am willing to try but never had success with that.
When we first started, I tried to do the Normal or standard TTC pull which is a tonka style truck with a rock in it and you pull it up an incline in the rough dirt.
Like this:
RC ADVENTURES - SCALE RC TRUCKS #14 - EVENT #5 TRUCK PULL T.T.C. 2009 - YouTube
Others do a truck to truck tug of war, though that is tough on motors.
When we first started, I tried to do the Normal or standard TTC pull which is a tonka style truck with a rock in it and you pull it up an incline in the rough dirt.
Like this:
RC ADVENTURES - SCALE RC TRUCKS #14 - EVENT #5 TRUCK PULL T.T.C. 2009 - YouTube
Others do a truck to truck tug of war, though that is tough on motors.
Die-Laughing
RCC Addict
Although I think it would be best if one person owned, I'm willing to throw down. I like the sled.
I was painting this one scout's pine wood car this winter this candy red and said yes that my JK color.
Kinda gives it that W.E Rock look. I also scored some new sweet wheels and tires.
Trey p.s don't let that sled get away. It is bad A$$