4w steering help

[PriMEd]

Hay guys, modding my trekker for 4w steer using stock losi servos. when plugging them into a DYI Y-connector matching wires color for color, it does a crab walk. Question is whats the wire color combo for the rear servo to make it right?

 

[Gvus]

You'll need a servo reversing harness

 

[PriMEd]

You'll need a servo reversing harness

ok, thanks GVUS.....I did a search & couldn't find the harness but I did find a good you tube vid about revering the servo itself

How to Manually Reverse a Servo - YouTube

I did it & it worked"thumbsup" used the Losi stock servo. Figured no harm if I fryed it.

 

[HPI-Killer]

Great info, does the servo still need reversing if its not fulltime 4ws, but operated by a 3 pos toggle on the tx?

Probably Sent Sitting On The Toilet...

 

[PriMEd]

Great info, does the servo still need reversing if its not fulltime 4ws, but operated by a 3 pos toggle on the tx?


Not sure its possible to hook it up to the 3rd channel since theirs only 1 steering input on the stock receiver.

But I did find this on

another thread
Bastens QuadSteer 4 wheel steering control module works with either 2Ch or 3Ch transmitters
it was posted by PatsPosts
on this thread http://www.rccrawler.com/forum/losi-micro-rock-crawler/491875-4-wheel-steer-help.html

 

[D&Ktechnologys]

PriMEd thanks for the youtube video"thumbsup" Did you ever try to swap the 3 wires in the plug?