Bully2RockRomper
Quarry Creeper
Hi Losi will you have the hacked gt3b's in stock again soon, or are they pre-order?
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
GT3B Hack Question and Answer Thread
- Thread starter losikid
- Start date
losikid
Got Worms?
I don't intend to stock GT3B's anytime soon, if ever.
The GT3C is in stock right now, however, and is a better radio in my opinion.
WesTX
Rock Crawler
So do you sell them hacked already and with a 6 ch receiver for those of us who aren't very computer literate and literate with coding, etc? Just starting to read up on the GT3C for my new build and need some extra channels for lights and such so trying to figure out how to do it and lost already!
Wes
Wes
losikid
Got Worms?
WesTX
Rock Crawler
When are you expecting more RX's?
Wes
Wes
losikid
Got Worms?
vava_sp
Newbie
Hi...
I tried many times to use 3 pos.Sw in the gear of my Tamiya F350 and have no success. I just got 2 position servo.
I appreciate if somebody could help me to do this. ;-)
[]s
Vava
I tried many times to use 3 pos.Sw in the gear of my Tamiya F350 and have no success. I just got 2 position servo.
I appreciate if somebody could help me to do this. ;-)
[]s
Vava
I found the calibration mode. No mention of it in the manual. I have no idea what to do once I enter calibration mode. Also I tried using my end points funtion to limit the throw on my servo and it only lets me adjust the end points in one direction.
losikid
Got Worms?
Just a heads up, I have final exams next week so I may not be paying much attention to my email or get orders shipped out. All current orders should be out here in a day or two. Any orders placed towards the end of the week and next week won't ship till after I'm done with finals.
If you go to the google custom search box and ask how to calibrate gt3c. That is how I learned to calibrate mine."thumbsup"
amatris1996
Newbie
hi i got the hack done on my GT3C 6.1 firmware, and also brought a Turnigy 9X 2.4GHz 8Ch Receiver
but it will not bind... is this because its Not a Gt3b? what am i doing wrong?
cheers
but it will not bind... is this because its Not a Gt3b? what am i doing wrong?
cheers
losikid
Got Worms?
You need to make sure you're following the binding instructions for that particular rx.
Cammmo
Newbie
Just wondering if anything shipped (especially mine) before finals?
Bully2RockRomper
Quarry Creeper
Hi OKRC, will you have more of your GT3B's available soon?
After 2 of them if possible?
After 2 of them if possible?
11 posts above yours.
Bully2RockRomper
Quarry Creeper
Thank you."thumbsup"
vava_sp
Newbie
There are anyone that use this firmware to shift gear in Tamiya F350 High Lift ?
I need help to do this configuration. "thumbsup"
I need help to do this configuration. "thumbsup"
drewbagel423
Newbie
Hey guys, I hacked my GT3B with 0.6.1 firmware, but now I can only adjust the steering endpoints in one direction, to the right. When I turn the steering wheel, it doesn't change which way the arrow is pointing. Anybody else experience this?
amatris1996
Newbie
how do i set crab on/off on the Th trim button?, and 4ws on the D/r, and Channel 3 trim as the rear servo trim? cheers
crawlerwon
Pebble Pounder
Have you figured this out? I also have a gt3b that i just hacked with the 0.6.1 firmware. but i can only adjust the end points to the right. The tx works to steer the truck left but i cannot get the arrow on the screen to point left when i turn the wheel c.c. in the endpoint menu... why? Its driving me nutz:twisted: everything worked before i did the hack. I have recalibrated the tx and tried everything i can think of.
