84yoda
I wanna be Dave
Correct.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Castle Creations New 1512 Sensored motors
- Thread starter whitrzac
- Start date
mikemcE
I wanna be Dave
The non sensored 2650 is a clone , I've seen both.
IF the Chinese vendor IS cloning, copying , or whatever, time will tell.
Amazon has increased the price, I'm still on B/O, waiting patiently
Hang up and Drive
IF the Chinese vendor IS cloning, copying , or whatever, time will tell.
Amazon has increased the price, I'm still on B/O, waiting patiently
Hang up and Drive
I was on Tapatalk and didn't see the links. I do now so I'll check them out. Thanks.
Castle solely own and run their motor manufacturing in Asia and clones from other companies copying their product(or trying to).Their is a link from another forum where they even show the build address,so it`s clear what is internet rumor and or misinformation "thumbsup"
So you're saying Novak is the only one in the right to sell brushless motors and Castle, Tekin, Holmes, leopard, trackstar, Gool, Hobbywing, etc are all thieves? Price gouging is price gouging, no sugar coating that. I'm not trying to argue with you or get you to save money if you lose sleep about it. I saw a good price for a motor on Amazon and shared the wealth without guilt or shame. If you want to pay list price because it makes you feel like a better person, Godspeed. I'm going to keep loooking for the best deals on quality parts and share when I can. I take the positive approach to helping others.
I always have to laugh when consumers blindly defend companies. Companies don't care about you. They care about money.
Gone are the days when companies offered products at fair prices with low profit margins. These days profit margins are out of control. Do the companies care that they're price gouging? Hell no. They care about the bottom line.
I've said it before and I'll say it again. If prices were more reasonable, clones wouldn't exist or at least wouldn't be so prevalent.
Gone are the days when companies offered products at fair prices with low profit margins. These days profit margins are out of control. Do the companies care that they're price gouging? Hell no. They care about the bottom line.
I've said it before and I'll say it again. If prices were more reasonable, clones wouldn't exist or at least wouldn't be so prevalent.
351Beno
Quarry Creeper
I have never seen any of them sell a motor with another's name on it saying it a real one.
That's fine I'm not saying the castle you got is or will be a copy. Buying a copy or knock off from someone saying it's a real deal if it's not is shady. Price gouging that's good guess the people that put the time into the countless hours of design and testing don't need to get paid. Guess you guys never have to pay worker's or insurance, ect, ect. I feel fine paying any good company if I can't afford their price I wait till I can or get cheaper from a real company no shame in that.
Last edited:
calcagno45
RCC Addict
Anyone get their motors yet?
Not yet, hoping soon so I can beat the piss out of it. For some reason I treat less expensive purchases with great disrespect. Sometimes the results are impressive and other times I'm glad it was cheap. I love durability testing.
:lmao:
You missed SCREAMER's point. If this is what you got from his statement the point went way over your head.
Do you understand profit margin? People at companies get paid. All of their insurance and benefits are covered. All of the R&D and manufacturing costs are covered. Money is invested back into the company. The rest is for padding the pockets of the higher ups in the company. It's not the average Joes making bank from profit margins. So basically you are saying you are fine with giving CEOs more of your money. Cool! "thumbsup"
mikemcE
I wanna be Dave
I would swear after reading this you were a Bernie Guy, not a Trumper.
Did you take any business courses ???
Did jah ever hear of STOCKHOLDERS
A great reason for not going public
Hang up and Drive
351Beno
Quarry Creeper
So the price is to high for you so it's got to be a high profit margin. "thumbsup" got it
Trump was the best option. It doesn't mean I agree 100% blindly with him or the Republican party.
I've been taking business courses since junior high and ending in college. I've worked in sales. It doesn't mean I agree with price gouging and out of control profit margins.
When did Castle become a public company?
Wow! :lmao: Yep, that's it. It's obvious you've never worked on the other side where you see profit margins.
Last edited:
351Beno
Quarry Creeper
Wow! :lmao: Yep, that's it. It's obvious you've never worked on the other side where you see profit margins.[/QUOTE]
You run your mouth about stuff you have no clue about. I see both sides of it and I can tell you it's not always gravy. You always sound like you have a chip on your shoulder.
You run your mouth about stuff you have no clue about. I see both sides of it and I can tell you it's not always gravy. You always sound like you have a chip on your shoulder.
Last edited:
There is no doubt that because it has the castle brand on it and that ugly green can the price is bumped up. Don't be blind people.. compare the prices of when castle first started with the mamba line.. I could afford a brushless system as a high school kit working a part time job. Now I work full time and find forking over the money for castle stuff a bit crazy. The same can go for all the name brands. Believe me.. we're paying a nice margin for stickers and engraving to show brand support.
You run your mouth about stuff you have no clue about. I see both sides of it and I can tell you it's not always gravy. You always sound like you have a chip on my shoulder.[/QUOTE]
Yep! Me has no clues 'bout nuthin.
You can keep your gravy and I'm certainly not putting chips on your shoulder.
calcagno45
RCC Addict
Wow. Pretty sure Castle isn't running a 501(c)(3) here.
mikemcE
I wanna be Dave
So why is Holmes priced the same ?
I still remember Sunoco 280 at 28.9 per gallon.
From most business plans the reason for pricing is apparent.
Sorry but profit is not wrong, it is the rewards for taking risks.
That IS the American way, I had products I sold at 600% markup.... that allowed me to sell the higher end products at a teeny margin to turn stock and keep customers.
If you don't own a retail storefront, where does your vast knowledge come from ??
Hang up and Drive
351Beno
Quarry Creeper
Yep! Me has no clues 'bout nuthin.
You can keep your gravy and I'm certainly not putting chips on your shoulder.[/QUOTE]
Yeah that post got a little messed up. The point is you spout off on stuff all the time and sound like the world owes you something. Castle products maybe higher priced then they where before cost of business goes up people get paid more, taxes go up, material's cost more i could go on and on. The extra price is not always profit. I see both sides of it running a small business which I don't own mind you. We get under cut all the time and have to find ways to stand out to keep and make customers. But to be fine buying from someone that is selling a fake where the name is not even changed I can't believe someone would recommend them to others.
Last edited:
Can't wait until my company can forget about customers! Boy, that will be the day! In the mean time I'll continue scraping along with outrageous profit margins that seem to only afford silly "customer service " and R&D. But I suppose I did finance myself a used car a few years ago, living pretty fancy with that 4 cylinder station wagon hauling my kids dontcha know. Might even get a few pairs of shoes this year.
clones are clones. They always have cheaper materials for that low price. Any company that gives a real go at engineering soon learns why the prices are where they are. Want a $80 4 pole brushless motor with support? I can make one, but it won't run as cool, it will fade more, it won't be waterproofed, the sensors will jitter at lower temps, materials will have half the temp rating, etc. Ive full assed enough motors, maybe it's time to sell some half ass motors like every other cheapie. All the loud folks don't seem to notice the difference anyway. Who needs Japanese laminations and bearings when the Chinese can make them for half price? They will even lie and call them Japanese if ya want!
