1:25 scale 1954 international harvester r190

[W1ck3d0n3]

Well new project I've been slowing working on. It's a fully 3d printed 54 international harvester r190. It will be using the Make It RC CTC01 chassis. The plan is to build a car hauler for my 25th scale cars and trucks whether they're rc or stadic models.
So far I have the cab, chassis, and flatbed printed.

 

[hnoroian]

Very cool!

 

[W1ck3d0n3]

Got a little work done in the International. Built most of the frame and got the body and flatbed mocked up, so far I'm liking how it's looking, I also got the rear buttoned up and the bed mounted also mocked out one of the gas tanks. Things coming together pretty good hopefully soon it should be running and driving.

 

[W1ck3d0n3]

Well I've been doing some 3D modeling lately and I modeled a rear body mount that helps kind of lock the flatbed in now that it tilts for better access to my electronics and battery tray, also 3D model a mock control box for the flatbed. I also took some 14 scale Tamiya semi truck wheel arches and shrank them down to 25th scale.

 

[W1ck3d0n3]

Got a tool box designed, printed and mounted, got color on the truck. IH Red for the cab, ultra matte for the frame and bed for now, might do something different for the deck of the bed. Also for a scale Winch and scaled it down to 25th scale. I'm still waiting to allocate money for some tires, it's the last thing I need to make the truck a driver.

 

[Mopar man]

Such a cool build thanks for sharing

 

[W1ck3d0n3]

Got paint done on the truck at least for now, took the tires off of the my 1:25 scale GMC cab over just to see how the look on the truck and I'm stoked about how things turning out.

 

[hnoroian]

I'm stoked about how things turning out.

Heck yes you should be stoked! There isn’t anyone that has that around, and exactly what drives this hobby community.