2012 Super Shafty.com Scale Dash Truck Pics

[ROWDY RACING]

@ Farmer, Jerry Garcia, or Chong?

 

[Farmer]

@ Farmer, Jerry Garcia, or Chong?

Nailed it first guess"thumbsup" Jerry used to be a stand up Mc Farlane toy. Had him in my old mog chopped in half. Found him the other day and started hacking.
Later,
Farmer

 

[ROWDY RACING]

Nailed it first guess"thumbsup" Jerry used to be a stand up Mc Farlane toy. Had him in my old mog chopped in half. Found him the other day and started hacking.
Later,
Farmer

Awesome. 8)

 

[stelerzman]

Re: 2012 Scale Dash Truck Pics

Here is what I'm working on. Not finished now, but will be soon.

She's up and running, I have a new set of wheels from
Crawling Calvin & a new esc/motor on the way. :mrgreen:

 

[Bart bender]

That's hilarious and true:lmao: The rig has changed a lot since then, but is still capable of getting some sick air!!!

I'm surprised you don't have a set of SS.com TF axles under it.

 

[Farmer]

I'm surprised you don't have a set of SS.com TF axles under it.

I know I'm a bad boy Rick locked me in the Dungeon for a week and stopped sales when I told him I was going back to Wraith axles I just can't resist the steering and diff cover. I will admit the TF axles will take way more abuse"thumbsup"
Later,
Farmer

 

[CD13]

If I haul this down would anybody be interested in giving it a go? :ror:

 

[stelerzman]

HELL YA, I'm in."thumbsup"

 

[stelerzman]

What is needed to hook it up?

 

[chicklet]

If I haul this down would anybody be interested in giving it a go? :ror:

HELL YEAH!!! :twisted:

 

[CD13]

Just need a cross bar between the chassis rails. alum. or strong enough to not brake. There's an S hook on the end of a chain. "thumbsup"
I knew you 2 would be in. :ror:

 

[chicklet]

Just need a cross bar between the chassis rails. alum. or strong enough to not brake. There's an S hook on the end of a chain. "thumbsup"
I knew you 2 would be in. :ror:

I can cut one but don't have aluminum. I do have some fat delrin bar.

Maybe we can have a little ttc pulling challenge "thumbsup"

 

[stelerzman]

Well I'm gonna make mine out of TITANIUM, just to make sure.:lmao:

 

[Farmer]

I'm in on the sled pull"thumbsup"

Can't wait, just need some more LED'S;-) for the night run, of course.
Later,
Farmer .

 

[stelerzman]

Hey Brittany, what chassis are you running? I might be able to make an aluminum mount for you. LMK.:mrgreen:
I'll need some specifications.

 

[nicodrive01]

If I haul this down would anybody be interested in giving it a go? :ror:

for sure, that thing rocks "thumbsup"

 

[chicklet]

Hey Brittany, what chassis are you running? I might be able to make an aluminum mount for you. LMK.:mrgreen:
I'll need some specifications.

Wraith. Will the cross bar be needed to connect to the rig or on the trailer itself. If it's for the rig, I already have a chassis brace and tow hook installed on mine. It's ready to pull. I thought CD needed something for the trailer.

 

[stelerzman]

Ok, as long as it drops a little below the chassis and has a place for the hook to attach to, you should be good."thumbsup"

 

[Jslick]

If I haul this down would anybody be interested in giving it a go? :ror:

I'd be up for it. I have seen other clubs use the sled in comps and they took some extra chain and made two hooks that went over the axle, that way everyone pulled from the same position.

 

[stelerzman]

This looks like a standard puller rig sled mount.