Grimreeper
Rock Crawler
I've been looking for the same answer. I got some cool RC Rx that bind but nothing for 4th channel.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
4PK Setups, Tips, Tricks and Help
- Thread starter Harley
- Start date
Got a r614ff and r614fs today
Has to be in c2 mode for ch4 to work. TFR4, etc will not work for 4ch, even on the 4pks-r.
Futaba airplane RXs don't bind at all.
stelerzman
I wanna be Dave
Hey Harley, thanks for always helping us out with this radio.
I'd like to know if these switches can be changed to an on/off and possibly a 3 possition switch.
PS3, PS2 & PS1 can they be programmed to on/off,
DT 1-2-3 can they go 3 possition. Technically speaking making this a 6 channel radio?? Reason I'm asking is I found a4ch and 6ch rx on Hobbyking i wanted to try.
https://hobbyking.com/en_us/checkout/cart
I'd like to know if these switches can be changed to an on/off and possibly a 3 possition switch.
PS3, PS2 & PS1 can they be programmed to on/off,
DT 1-2-3 can they go 3 possition. Technically speaking making this a 6 channel radio?? Reason I'm asking is I found a4ch and 6ch rx on Hobbyking i wanted to try.
https://hobbyking.com/en_us/checkout/cart
Panther6834
I wanna be Dave
I know this thread is for the 4PK, and the info I need is for the 7PX, but I couldn't find any 7PX-related thread covering my problem. First, I'm a crawler newb, so I have little-to-no knowledge in this area.
My problem involves 7PX settings to control a DIG servo. For my first crawler, I decided to get the new Axial Capra, which uses a micro servo to operate the DIG switch. Officially, the Capra's DIG is a 2-position (4WD & FWD w/ locked rear). However, if the proper settings can be done, there is (theoretically) a third position (FWD w/ freewheeling rear) that can be accomplished, if the servo can consistently hold a neutral position (if I were to used the setting servo as an example, this third position would be the "straight ahead" position).
Unfortunately, I haven't the slightest clue what Tx settings I need to set. If a 3-position DIG could be configured, that would be fantastic. At the same time, as long as someone can help me resolve the 2-position settings problem, I'll be happy. So, can anyone PLEASE help me? Any assistance will be greatly appreciated. Thank you, in advance.
Sent from my SM-T830 using Tapatalk
My problem involves 7PX settings to control a DIG servo. For my first crawler, I decided to get the new Axial Capra, which uses a micro servo to operate the DIG switch. Officially, the Capra's DIG is a 2-position (4WD & FWD w/ locked rear). However, if the proper settings can be done, there is (theoretically) a third position (FWD w/ freewheeling rear) that can be accomplished, if the servo can consistently hold a neutral position (if I were to used the setting servo as an example, this third position would be the "straight ahead" position).
Unfortunately, I haven't the slightest clue what Tx settings I need to set. If a 3-position DIG could be configured, that would be fantastic. At the same time, as long as someone can help me resolve the 2-position settings problem, I'll be happy. So, can anyone PLEASE help me? Any assistance will be greatly appreciated. Thank you, in advance.
Sent from my SM-T830 using Tapatalk
Harley has a video on the Hurtz DIG and shows how to set-up a Futaba radio for this without opening the transmitter and fooling with the innards. Not sure if the settings apply to the 7PX but it might get you on the right track. Let us know how it goes as I am looking at a 7PX myself.
https://youtu.be/MviC0ClKcaw
https://youtu.be/MviC0ClKcaw
Last edited:
Panther6834
I wanna be Dave
Well...it did, and didn't, help. It helped to the point that I know it's not only possible, but that I also know there's a good possibility I can set the Axial Capra's 2-position DIG as a 3-position. Unfortunately, the 7PX has an entirely different menu system, so not even sure where to start. As such, I've reached out to Josh (aka "Harley") at Vanquish, as he did say, near the end of the video, if anyone needed any help on setting up a DIG on a Futaba Tx, to contact him.
Hopefully, he'll get back to me soon, with the need info. Once Vanquish has the VS4-10 Pro back in stock, I was already planning on ordering one, along with the Vanquish DIG...so, whatever info he's able to provide, I'll be able to user it again on the VS4-10 (and, potentially, future vehicles).
~ More peace, love, laughter, & kindness would make the world a MUCH better place
