A winning design! TheCrawlerStore Chassis Kits - Post your wins here

[kevinlongisland]

TheCrawlerStore is very pleased with the performance of our chassis kits (NN, CFNN, Stick) over the past years. In conjunction with a great driver our chassis kits have been at the top of the pile in many comps. Post any podium position here and I'll be more than happy to add them to our comp wins section for each chassis kit. Congrats on the wins guys!!!!!!

 

[CSR]

I won the Green River Bash 2 comp in KY last weekend with Super Class TCS "Stick". That event was our season finale, so the win secured 1st place for me in the SERCRC Super Class points series.

 

[TwistedCreations]

Yeah and I finished right behind CSR in 2nd place by only 2 points w/ my TCS "Stick". The rest of the field was another 20 points away :lol: :lol:

 

[JasonInAugusta]

Stick:

1st Place at Green River Crawl Fest 2005

1st Place Buford Dam Buster 2005

1st Place USRCCA Nationals 2006 8)

 

[DISTURBIN' tha PEACE]

Thanks Kev, results speak for themselves.


Rumble On The Rocks
SUNDAY January 15, 2006

Supercrawler

1. Sheldon, DISTURBIN tha PEACE, Stick


HRCC Fall Event #1
Aug. 6, 2006
SUPERCRAWLER

1. DTP, Stick

 

[kevinlongisland]

I added all your wins to the "Winning Design" section of The Crawler Store. Again, congrats on all the great driving guys and thanks for choosing a crawler store chassis.

 

[rockwerks]

I added all your wins to the "Winning Design" section of The Crawler Store. Again, congrats on all the great driving guys and thanks for choosing a crawler store chassis.

eHy does using a switch I bought from you count?

 

[kevinlongisland]

eHy does using a switch I bought from you count?

:lol: I think that's pushing it! :lol: (good one)

 

[cars69]

1rst Place PARC #13 at the Hole in the Rock.
This was the first run for this truck with no test
time before the comp. I just love this Chassis! The
copies aren’t as good, I know because I ran one all
of last year. Kevin yours is the best by far. It's a WINNER!!

Rick

 

[kevinlongisland]

1rst Place PARC #13 at the Hole in the Rock.
This was the first run for this truck with no test
time before the comp. I just love this Chassis! The
copies aren’t as good, I know because I ran one all
of last year. Kevin yours is the best by far. It's a WINNER!!

Rick

Rick, I'm really glad to see you take this win. After all the past electronics problems etc., its well deserved. Glad to see you got the bugs worked out.

 

[goingvertical]

1st place- hrcc 2006 summer series winner."thumbsup"

 

[TwistedCreations]

1st place TSC Superclass Points Series "thumbsup"

 

[run2jeepn]

Lets see some pic's of each winner with a break down on what as been done to them. I'd love to see the specs on all those. To see if you guys are running the same set up or what your think makes you set better then other Sticks. The little things.

 

[TwistedCreations]

Okie Dokie Boss "thumbsup"

The biggest advantage I have is because of the TSC sticker on the roof

But I run Airtronics 359 servos, 6 cell sub c's under the knuckles w/ BB's in the front tires also. Another thing I did that really helped me out and my driving style, was to put 100wt. oil in the shocks. It really stopped the wobbling/bouncing around that I would get, when trying to climb something at full throttle. Also, with it being a bit stiffer, it allows me to carry a tire sometimes over things when needed. I also like running the Moabs backwards. For me when running them forward, they would tend to bounce around side to side more when climbing. When reversed, they go straight up now. Also, I use Simple Green on my tires all the time. Makes them more sticky than a brand new set

I love the 2nd pic the best of my truck(Thanks Sven)... But that is the last you will see of that truck. It is getting a complete rebuild this winter "thumbsup" . I only had to change 1 stub axle this whole year. I never did anything else to it. To me, if I can beat the living shiat out of a truck a whole year and never have to do anything to it and then rebuild it in the winter, that sells me over anyday 8) 8)

 

[CSR]

My rig started with a Stick chassis from The Crawler Store, a pair of locked Clodbuster axles, ThunderTech ajustable motor mounts, a pair a Integy 55 turn motors w/heavy springs, 9T front/8T rear pinions. The front and rear Hitec HS5645MG servos get their juice from a Novak Super Rooster speed control, connected to three Team Orion 3000mah NiMH cells on each front knuckle with Deans Ultra plugs. Emaxx shocks with stiff springs. The radio is a modified Traxxas TQ3. Tires are Proline 40-series Moabs on Proline Outback wheels w/Twisted Toys rockrings.

Pics were taken the day after returning home from the Nationals in Moab.... still had Moab dirt on it.

 

[run2jeepn]

So neither of you guys were running the XL's?

 

[TwistedCreations]

nope

 

[JasonInAugusta]

TTR BTA steering
Mamba 25/Revolver
Airtronics 94359 servos
Traxxas big bore shocks with unknown oil (they might still have oil in them, never checked'm since I built the rig at Green River)
TXT outbacks/40 series Moabs (same tires that have been on it from the start)
Unknown amount of BBs in front tires - "That feels about right."
No foams
Fusion 3300s under the knuckles

 

[CSR]

So neither of you guys were running the XL's?

I tried the XL's but didn't like them. The original Moab's work better for me.

 

[cars69]

PARC # Irst PLACE

16" Wheel base Crawler Store Stick Chassis
Custom BTA Steering
Losi MF2 Alum. Rear Shocks With Stiff Emaxx Springs & Bump Stops to control articulation
55 lathe motor front with 8 tooth pinion
45 lathe motor rear with 6 tooth pinion
Masher 40's with cut tread & No Foam-Thunder Tech Wheel widners
Grover knuckle battery packs in front wheels 4 Sub C's in each wheel
Hitec HSR-5995-TG Robot Servos front & rear
Novak Super Rooster ESC
Mpi Voltage Regulator
Airtronics M8 Radio