Anyone into Xmods?

[smokinubyrc]

This speed test was done with a Tamiya speed tester. The test car sports AWD, Carbon Fiber Drive Shaft, RS open bearings, Lithium Power, 4 FET Stack, and the new Nuke 130SM Super Modified Motor.

http://video.atomicmods.com/Speed_Test_Nuke_130SM_LG.wmv

 

[Brandon M]

thats gen1, evo's are like 20x better!

No you got it backwards EVOS suck gen 1's rule

 

[trickedoutTLT06]

No you got it backwards EVOS suck gen 1's rule

haha, the suspension on my evo is soo much better than gen1..and my evo is easier to work on

 

[smokinubyrc]

No you got it backwards EVOS suck gen 1's rule

agreed i need a main board a v2.2 i have the sage 2 yellow in mine.

But i still need the main board receiver and servo and then the stacked v2.2 board!

i hate little kids who get ahold of little wires! :-(

 

[Shaun]

How about putting a screw in and not noticing it went through 3 wires? That took sometime to solder back on. I tried to get back into it a few days ago but I finally just said fawk it and went slot car racing.

 

[smokinubyrc]

How about putting a screw in and not noticing it went through 3 wires? That took sometime to solder back on. I tried to get back into it a few days ago but I finally just said fawk it and went slot car racing.

lma0 That 5uc5 man g3n 1s can do that t0 y0u !!1!!1!!

 

[Robb]

Took a look at my xmod, and found it's tires to be about 1" in diameter. A liitle math later, I realized that 90mph with 1" tires means a tire RPM of 30,000.

That is a helluva secondary driveline that can handle 30,000 RPM.:shock:

 

[Harley]

This speed test was done with a Tamiya speed tester. The test car sports AWD, Carbon Fiber Drive Shaft, RS open bearings, Lithium Power, 4 FET Stack, and the new Nuke 130SM Super Modified Motor.

http://video.atomicmods.com/Speed_Test_Nuke_130SM_LG.wmv

Stationary test are a whole different deal!

spinning your wheels on a KMA dyno wanna-be is a whole different thing then running down an actual course. I still have seen no proof of a fast xmod

 

[Mikekx65]

There is now way in hell that a xmod will do 60 mph...the only way that will happen is if you throw it off a cliff or out of a car doing 60. Your starting to sound like Krawlin with his 30bps walmart paintball gun. There MIGHT be a hand full that can do 60 but there pretty much worthless at those speeds...cool but worthless

 

[Harley]

I simply can't imagine an xmod having the mass to provide enough traction to spin tires at that speed and keep itself on the ground. Still call bull****.

 

[Robb]

There is a vid of one on youtube doing 99 km/h (60mph) on a test stand, but as accurately stated by Harley, a Tamiya stationary stand is WORTHLESS in comparison to true ground speed. The stands don't begin to replicate ground resistance, and are pretty much just a fancy way of showing tire RPM in a low resistance scenario. A photo-tach could do the same thing.

 

[clod booster]

i would be turning my xmods into a crawler but i busted the center peice's tab that holds the rear end on. anyone got a spare?

ill try to get a thread going eventually.

 

[Shaun]

JB weld.

 

[Harley]

I am not saying I haven't wanted to buy one before, I am just saying I don't believe the speed claims.

Xmodification did a pretty cool blazer that made we want one again.

 

[Brandon M]

I am not saying I haven't wanted to buy one before, I am just saying I don't believe the speed claims.

Xmodification did a pretty cool blazer that made we want one again.

Yeah thats the xmods trucks those are the kool ones I keep those. I am even working on a 4 runner xmod

I have another xmod truck titan and blue f150 body nib if any one wants to buy one

 

[cartronicshn]

I am not saying I haven't wanted to buy one before, I am just saying I don't believe the speed claims.

Xmodification did a pretty cool blazer that made we want one again.

I hear ya, i have 3 gen 1 xmods, an evo 'stang, and a f 150 with 4wd and lift kit, i have a couple stage 2 nib motors and gears and soem more stuff for them, i juts lost interest on them after i put all the stuff on the f 150 and use the stock motor and gearing and it could barely pull it's weight:x, so i said enough $ dumped on this stuff:roll:, until i saw Xmodifications build, they are really awesome"thumbsup", i might hit up Corey at Rpp for a runner kit or yota truck8)

 

[theshimonator]

My Xmod drag car

yes it's fast no you can't drive it 8)

So what sort of seed can this get upto? any specs? also some nude pics would be good!

 

[trickedoutTLT06]

So what sort of seed can this get upto? any specs? also some nude pics would be good!

it will probably only hit like, 35-40 right now. but thats with stock motor and gearing, pretty soon it will have an atomicmods motor. and I'll try to get some nekkid pics later "thumbsup"

 

[theshimonator]

it will probably only hit like, 35-40 right now. but thats with stock motor and gearing, pretty soon it will have an atomicmods motor. and I'll try to get some nekkid pics later "thumbsup"

what have you actually changed other han cosmetics like tyres and body height and stuff?

 

[trickedoutTLT06]

what have you actually changed other han cosmetics like tyres and body height and stuff?

Stage 2 motor, red gearing
Alloy rear gear box case
Alloy dogbones
alloy knuckles
alloy shafts/outputs
radioshack tire upgrade with civic wheels (drag tires for pics, i rarely drive with them on)
Lithium-Ion batteries (wow huge upgrade)
atomicmods v2.2 board (need it to run the liths)
a ton of other stuff im forgetting about