Id like to be able to to put everything in my axial wraith on the honcho frame basically. I just find it too much of a hassle to get at the electronics and transmission of the wraith. So my question to you is would all the stuff for the wraith even fit on the new frame? ie wraith transmission fit on honcho frame. Also is the 4 link set up for the wraith even compatible for the honcho body?
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Axial wraith with a scx-10 honcho frame
- Thread starter nathan000
- Start date
-
- Tags
- axial conversion honcho wraith
AsILayDying
RCC Addict
Are you trying to take EVERYTHING and put it from the Wraith down to the SCX10? The transmission will mount right up with no modding. I think everything else you are doing will just take an attempt to see if it will work. If you have the right tools and a little know how anything is possible. Good luck, you should take lots of pics during this build.
crowninshield3
Pebble Pounder
Zonkered, here on the forums has one. The tow truck which is axial wraith axels and an scx10 frame. I'll search to see if I can find a thread on it. Seen it in person and it's bad ass.
alexchen86
I wanna be Dave
nathan000, here you go: http://www.rccrawler.com/forum/axial-scx-10/347663-mechanics-wroncho.html
There's a bunch of Wroncho builds once you have enough posts to use the search feature. You can YouTube Wroncho and see Bender's rig on there. Everything mounts up very easily.
Good luck and welcome to the forum!
There's a bunch of Wroncho builds once you have enough posts to use the search feature. You can YouTube Wroncho and see Bender's rig on there. Everything mounts up very easily.
Good luck and welcome to the forum!
crowninshield3
Pebble Pounder
Here's link, not a build thread, but it is the beast tow truck http://www.rccrawler.com/forum/california/263495-sacramento-scaler-gtg-comps-108.html
OntarioCrawler
Quarry Creeper
why? they have the same trans, you can use wraith shafts, and just swap wraith axles under your scx10. its been done. ill take whats left of your wraith.
Drail
N.E.R.C.C Uncle Blinky
NorZepol
Quarry Creeper
I put wraith axles under my scx10 and have since mounted a wraith cage to it. still in progress.
http://www.rccrawler.com/forum/axia...s-bwroncho.html?highlight=norzepol's+bwroncho
http://www.rccrawler.com/forum/axia...s-bwroncho.html?highlight=norzepol's+bwroncho
Protekyerneck
Newbie
I've done this, just to try it out I bought the same "Tamiya Upper/Lower Suspension Stay 47201" Bender did for the three link
Last edited:
