Badd'd Boggie (he is the snot) Honcho build

[Badd]

Well I started gathering parts for my new rig . This one will be the new SCX10 Kit with Trail Honcho Body .
Parts list
AX90014 SCX10 Honcho
AX30197 Axial Drive Gear Shaft 5x43.5 (for trans. to remove the slipper)
Stage3Racing hardened chromoly outdrives for trans.
CKRC alum Cs & knuckles
Ax30401 Axial Heavy Duty Bevel Gear Set 36T/14T (X 2)
Stage3Racing hardened chromoly lockers (X 2)
Castle sidewinder & BEC
Hitec HS645tg servo
motor 35T
Hot Racing scx28301 alum front & rear shock towers
Proline Powerstroke Scaler Shocks
3racing winch
with BOWTIE"s stickers
BOWTIE's taco grill stickers
1.9 Rok Lox (5 of them)
Wheels stock for now but will have Mayhem's soon.
paint by Badd
LED lights 2 sets
(1) will have 2 Head , 2 tail and 2 front marker lights
(2) will have 4 rock lights and 2 running lights
Some of the parts .

The cab is in the paint booth now .
more to come "thumbsup"

 

[2JSC]

Looks like a sweet parts list so far. "thumbsup" Are you wiring up the LED's yourself or using a "kit"? I ask because I'm still trying to decide on the route I want to go (head, tail & rock lights).

 

[Badd]

Oh who needs a stinking slipper clutch ? Parts number to delete it are AX30197 drive gear shaft 5x43.5mm and AX80009 spur adapter. The Stage3Racing hardened chromoly outdrives are a very nice fit .

I also started on the shocks . I used Team Associated 15wt fluid . I will most likely change that when the weather warms up . I'm also playing around with Axial spring from the kit . They seem to fit the Proline shocks very nice .

I plan on using the Axial truss (AX80043)on the rear . For upper links in the rear I using revo rods part # TRA1953 with Jato rodends . I removed the red and painted them a gun metal color to match the other links .

I also replaced the the Axail rodend with Traxxas #1842 .

I replaced the Axail drive shafts with Pede shafts . I had to use 4 males and 4 female to get the lenght I needed .

more to come

 

[constantmotion]

I replaced the Axail drive shafts with Pede shafts . I had to use 4 males and 4 female to get the lenght I needed .

I was gonna use female Pede shafts on mine...didn't have but one male. They don't fit the Axail's male shafts anymore. They must have changed the mold. I will be swapping mine out to full Pedes later on.

 

[Badd]

For the paint I did the same thing I did on my Blazer . I used Tamiya Copper (PS-14) , Black (PS-5) & Silver (PS-12) for the rust coat on the inside .

Then I backed that with Black (PS-5) .
Next on the outside I used Silver (PS-12) to look like steel panels .

Next I used Tamiya Green (PS-9) as my outer color .

I will get better pics out side this weekend .

 

[bmuzz1]

The rig and paint look really sweet Badd. You got some nice upgrades there too!8)

 

[Turn'Nburn]

i like the paint idea. i may have to borrow it sometime."thumbsup"

 

[rocksmoker]

nice rig

good looking truck, i need to buy one now

 

[Badd]

Looks like a sweet parts list so far. "thumbsup" Are you wiring up the LED's yourself or using a "kit"? I ask because I'm still trying to decide on the route I want to go (head, tail & rock lights).

I will have them made . 2 sets So I can run head , tail and front marker lights as 1 set . Rock lights and off road lights as another set . "thumbsup"

I was gonna use female Pede shafts on mine...didn't have but one male. They don't fit the Axail's male shafts anymore. They must have changed the mold. I will be swapping mine out to full Pedes later on.

Pede is the best scale driveshafts . "thumbsup"

The rig and paint look really sweet Badd. You got some nice upgrades there too!8)

Thanks for the kinds words . "thumbsup"

i like the paint idea. i may have to borrow it sometime."thumbsup"

Borrow away , the body on my Blazer looks good with scratches . I think this one will look even better .

good looking truck, i need to buy one now

Thanks "thumbsup"

 

[rednck21]

looks great badd!! want to sell those stock axial driveshafts?? :mrgreen:

 

[Badd]

looks great badd!! want to sell those stock axial driveshafts?? :mrgreen:

Nope sorry , with the parts left over from this build . The parts left over from my Blazer .A spare set of axle ,I only need frame rails and I will have another roller . "thumbsup"

 

[eron]

Nice tube work! :mrgreen:

looks great man, i like the color!

 

[Aaronb]

where did you get the stickers?

 

[Badd]

looks great man, i like the color!

Thanks man "thumbsup"

where did you get the stickers?

The grill, Marlin ,TRD and Warn stickers are from BOWTIE on here . The RCCrawler sticker is from a Losi grappler sticker set . "thumbsup"

 

[70duncan]

I realy like how you did your rust color. That looks better than any other rust job out there."thumbsup"

 

[braceysdad]

Cool truggy...

 

[Badd]

Cool truggy...

It AIN'T a TUGGY ASSHOLE !! It is a Boggie

 

[Badd]

Cool truggy...

I realy like how you did your rust color. That looks better than any other rust job out there."thumbsup"

Thanks man , I did this on my Blazer . It turn out great after running it . The scratches look pretty real . "thumbsup"

 

[Chargerguy]

Nice ride Badd, I need to switch to that darker grill, I like yours much better"thumbsup"

Nice little addition would be some Tamiya mirrors:shock:

 

[Badd]

Nice ride Badd, I need to switch to that darker grill, I like yours much better"thumbsup"

Nice little addition would be some Tamiya mirrors:shock:

Thanks for the kind words. I like the green on these rigs . I agree the darker grill looks better . As for the mirrors , it want happen . This is my breater rig and they would last about 5 mins. lol I got my Blazer for the detail work . "thumbsup"