• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Badd's K-5 Blazer

small update
I have been working crazy hours . Nite then Days ,Weekends then Weekdays . I was off work today so I got a little done . I worked on the rear interfenders and the floor . I would like to ring Jeepcj578 neck for all the bars I had to work around . As for right now there is 7 peices that make up the floor . Some of those peices have 4 or 5 peices that make them up . None of them are bolted in yet (just laying on the frame) .There is still alot of work to do on the floor but it is coming together . Well on to a few pics .
floorwork008.jpg

floorwork009.jpg

floorwork010.jpg

floorwork011.jpg

floorwork012.jpg


The spare tire was a tight fit with the inter fenders .
floorwork014.jpg

floorwork015.jpg

floorwork018.jpg

floorwork019.jpg
 
Last edited:
:lmao:looks good, but dam BOB thats some big ars fender wells.:shock:
I had to make them follow the inter fender bars BOB !! I tried to make them somewhat smaller but they didn't look right . The most I could have shortend them would have been 1 1/4". But again they didn't look right not following the fender bars .

lol this looks like a PITA!!
you know it
 
Well I finished the rear floor . So it was time for paint . I went out and bought some Dupli-Color splatter paint part number DM100 . It is grey and white that was the only color Auto Zone had in stock . I scuff sanded all the parts with 220 grit paper . Then I sprayed a light coat on the parts . I left the Styrene showing thru in the low spots not tring to cover it all . I let that dry and sprayed on a light coat od Tamiya PS-5 black . This give and nice scale RINO-LINER look . here is a few pics
after sprayed with splatter paint
floorwork020.jpg

floorwork021.jpg

After sprayed with the Tamiya Black
floorwork025.jpg

floorwork028.jpg

floorwork031.jpg

floorwork032.jpg

floorwork034.jpg
 
Last edited:
small update
I got the front inter fenders , kick panel and firewall done .
floorwork061.jpg

floorwork060.jpg

floorwork059.jpg

I had to go with the a redneck kick panel . The driver has got to see where he is putting the tires .
floorwork035.jpg

floorwork038.jpg

floorwork040.jpg

floorwork041.jpg

some tire stuff pics
floorwork047.jpg

floorwork049.jpg

floorwork052.jpg

floorwork053.jpg

floorwork055.jpg
 
I got some paint on the interfenders and firewall . I did the bedliner effect on the underside of the interfender and fire wall .
floorwork065.jpg

floorwork063.jpg

floorwork062.jpg

floorwork068.jpg

floorwork069.jpg

floorwork070.jpg

floorwork071.jpg

floorwork073.jpg

floorwork074.jpg
 
Last edited:
how about a true Alum. dash ? I have the scale steering wheel and gauges from RPP to add to it .
fdashwork007.jpg

fdashwork008.jpg

fdashwork010.jpg

fdashwork009.jpg
 
Back
Top