Build List

[ogreCyques]

Hi All, Since I just did taxes I'm about to pull the trigger on my amazon wish list and build my crawler, I was hoping could I get some input on if this build list is good parts or garbage?

SXC10II Kit
https://smile.amazon.com/dp/B01GIKIUQG/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I3DKMBNHW8WQLA

Remote: FlySky GT-3c
https://smile.amazon.com/dp/B00FS2U86G/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I1LRF6Y5ZSTWII

ESC: HobbyWing QUICRUN 1060
https://smile.amazon.com/dp/B00LXCM3Q8/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I2IVSMQKGOD7SQ

Motor: RC4WD 35t
https://smile.amazon.com/dp/B00DZ7CXYQ/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I3PLK09WYLM5NZ

BEC: Castle Creations BEC
https://smile.amazon.com/dp/B000MXAR12/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I31SL5TOMSU02O

Servo: Solar D772
Solar Servo D772 High Voltage 0.17sec@7.4v 64g Digital Metal Gear

Servo Horn(s): Integy 23t r13,16,19mm and Integy 23t r20, 24mm
https://smile.amazon.com/dp/B0047YL0C2/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I1H9UYTF4IIRHO
https://smile.amazon.com/dp/B00XSEJE9I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I2GRS6TQF2KNZZ


Battery: Turnigy 3000mAh 3s
https://smile.amazon.com/dp/B01G2V1VS0/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=I3E9A24YLYX8PI

Charger: Turnigy Accucel 80w
https://smile.amazon.com/dp/B00T3RKONE/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=6K1LQ9ES97JR&coliid=IYZMGFHDD00AJ

Thank You very much

 

[rustneversleeps]

Looks like your off to a good start i say...."thumbsup"

 

[EeePee]

Rebuildable motor would be advisable.

 

[ogreCyques]

Rebuildable motor would be advisable.

Any suggestions?

Sent from my SCL23 using Tapatalk

 

[EeePee]

Brood and Holmes are good. RC4WD has one. Few more places too. Machine wound are about $35, and the nicer motors can easily be double that.

 

[Natedog]

Looks pretty good, Hobbywing 1080WP is a much nicer ESC for about $40, but if your budget can't do that the 1060WP is rock solid reliable.

 

[ogreCyques]

Looks pretty good, Hobbywing 1080WP is a much nicer ESC for about $40, but if your budget can't do that the 1060WP is rock solid reliable.

Just added to the list! Thanks


Sent from my SCL23 using Tapatalk

 

[ogreCyques]

Does the gearing for the motor to trans come with the kit, or do I still need it?

Sent from my SCL23 using Tapatalk

 

[mikebecher]

Does the gearing for the motor to trans come with the kit, or do I still need it?

Sent from my SCL23 using Tapatalk

Yes, there's a 15t pinion included in the kit.

 

[Smokin' Joe]

As long as your receiver can handle higher voltage, the 1080 has an internal BEC you can set at 7.4 volts to power your servo if you want (may not need the external BEC in this case).