capacitor help...?

[elsewhere]

i have an esc that comes with a 470uF 25v cap stock.
i have read on here that a person can increase the uF rating to lessin cogging...

said person installed a 1500uF 16v cap, i was able to come up with a
1000uF 35v cap.
will the 1000uf 35v cap work?

if not it was the LEAST expensive mistake purchase i have ever made in this hobby...

thanks ahead of time.

 

[Charlie-III]

It will likely work. The biggest concern is the voltage rating, you want the CAP to handle whatever pack voltage you run.

Did you try looking at DigiKey? They have a pretty decent selection of parts and may have what you're looking for.

The best way to lessen cogging is to run a sensored brushless ESC & motor.:roll:8)

If it's a scaler or basher, cogging is less of an issue.;-)

 

[elsewhere]

im only running a 2s 7.4v with 350mah
the stock cap was 25v which is pleanty, i just wasnt sure if the 1000uF would be enough or is too high...