Clodbuster Pulling Monster Truck

[RoadKing]

Hi

I buil my Clodbuster for pulling.What is the best brushed motors for pull?My Clod is stock for stock class."thumbsup"

 

[1BadJeepBruiser]

Hi

I buil my Clodbuster for pulling.What is the best brushed motors for pull?My Clod is stock for stock class."thumbsup"

Box stock nrctpa class ? Find a set of magnet mayhems 22x1s. Will have to search evil bay for them

 

[RoadKing]

Ok,thanks for information.It's better use differential locker front/rear and don't use rear steering for pulling.

 

[RoadKing]

On my clod have two Integy Ball Differential.It's goog for pulling or no good?

 

[paleblue46]

You dont want a ball diff. you should lock the stock diff if you have them , clean very well remove ALL the grease and epoxy the gears to the center gear. I have been pulling clods for years in our club . Which club are you setting up for? , each has a little different rules for stock class .

 

[RoadKing]

Thanks for information.I am from Québec,Canada

 

[ThunderVP]

Yes, ball dif would be very bad for pulling. Most stock classes require the use of stock gears anyway.
Lock the rear steering and rear suspention.

For brushed motors, the 360 mega is a good choice if you can find some. (you need a forward and reverse wind)
You could also use adjustable motor mounts to change to a smaller pinion to make faster 540 motors work ok as well. Modified motors would have adjustable endbells so you can reverse time one for the rear.

 

[RoadKing]

Ok,i have ball differential now,better remove this and locked differential.Motors set up is Mag Mayhem 360.

 

[RoadKing]

Today buy Mag Mayhem 360 Mega Motors and Pulling Hicht with lock rear steering.Yesterday locked my rear suspension,remove two piggyback shocks rear and put two Ultimate scale shocks with stopper inside for lock rear suspension and put two others Ultimate scale shocks front(unlocked) and keep two piggyback shocks.

 

[RoadKing]

Suspension shocks."thumbsup"

 

[RoadKing]

I receive my exhaust stacks today fix tonight for take picture.

 

[JatoTheRipper]

I like the look of those piggyback shocks on the Clod!

Just out of curiosity, why did you choose two narrow tires rather than one wide tire per wheel?

 

[RoadKing]

Now for the look,maybe better traction i don't no.

 

[RoadKing]

I see on Ebay,Hot Racing Tamiya Clodbuster Har Hi Tq 100:1 gear set.This gear set is good for pulling?:roll:

 

[RoadKing]

APM Exhaust Stacks picture 8)

 

[ussprinceton2004]

what paint scheme are you planning on it, or are you leaving it mainly white...looks too clean

 

[RoadKing]

Maybe same Michigan Ice Monster.

 

[RoadKing]

Today change ball bearing differential for aluminium gears with lock and fix Mag Mayhem 360 motors,fix Mattzilla front bumper.

 

[1BadJeepBruiser]

Run a 9t in the back and 10t in the front, helps combat the stall. Lock the rear suspension out. Find the hardest foams you can for tires. 1/4 servo on front for steering duties

Here's mine

 

[RoadKing]

Very nice truck.Your information great for me thank you very much.Yes,run 9T back and 10T front,Rumble tire(now have only one set),locked rear suspension,hitch.My servo is Hitec-HS-7954 Hight-Voltage Ultra Torque Dual BB.