• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Crawlmaster 540 Rock Crawler motor- The low end King!

Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

Sir Holmes, sorry for blowing you up but is there a way for me to tell which address you shipped my motor to? My PayPal shipping address is different than the one I put in through your site.

It says it is being delivered tomorrow so I want to be sure I am there to get it at whichever address it's going to.

Again, sorry for doing this in the thread - I always hate when people do that but I assumed you get bombarded with e-mail and for good reason you have PMs disabled. "thumbsup"

Thank you, sir!

Fink
i-LgFpTrs-M.gif
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

I'll have to check when I get to work. I didn't see my worker pick up the soldering iron yesterday, if he forgot to put on those motor leads I'm yanking out his toenails. I even reminded him twice while he was going through orders.
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

JohnRobHolmes said:
I'll have to check when I get to work. I didn't see my worker pick up the soldering iron yesterday, if he forgot to put on those motor leads I'm yanking out his toenails. I even reminded him twice while he was going through orders.
Click to expand...

Oh man...I hope he did! I'm terrible at soldering!

You should have my e-mail on file if you just want to e-mail me and let me know where it's being sent.

Thanks much!

Fink
i-LgFpTrs-M.gif
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

JohnRobHolmes said:
I'll have to check when I get to work. I didn't see my worker pick up the soldering iron yesterday, if he forgot to put on those motor leads I'm yanking out his toenails. I even reminded him twice while he was going through orders.
Click to expand...

Just sent you an e-mail but it looks like this poor guy is going to be missing some toenails!

The motor itself looks like an amazing piece of art - highest quality I have ever seen, that's for sure!

Thank you, sir!

Fink
i-LgFpTrs-M.gif
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

What is the weight of these Crawlmasters?
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

a smidge over 6 ounces. I'm not at work yet so I can't weigh. I don't have it on the site, didn't realize that!
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

JohnRobHolmes said:
a smidge over 6 ounces. I'm not at work yet so I can't weigh. I don't have it on the site, didn't realize that!
Click to expand...

Is it safe to say a level for will get you 5oz flat?
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

Close to it. 5.15oz would be easy to hit. With a bit more work and cherry picked armatures we could hit 5 ounces. With that amount of labor it would be the same price as a set of Puller 500s, so it would only be worth it IMO if you had time constraints.
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

JohnRobHolmes said:
Close to it. 5.15oz would be easy to hit. With a bit more work and cherry picked armatures we could hit 5 ounces. With that amount of labor it would be the same price as a set of Puller 500s, so it would only be worth it IMO if you had time constraints.
Click to expand...


puller 500's what are those? :ror:
 
Which would be better 13t crawl master or 27t torque master? Axial wraith kit and your brxl. Going to be a around the yard play toy some light crawling and trail riding. Also can I come to your shop to pick them up I'm by St. Louis or can you ship them next day?
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

We have parts to build both motors, and typically ship within 48 hours of the order this time of year. An EMS shipment could be done no problem. You could come and pick up the order if you are travelling through town, we would just need to coordinate it with my workers or myself.

Either motor will be a good choice. I would choose the Crawlmaster for better low speed control. If you want better torque the TorqueMaster version is a good choice. Since you will use the BRXL the drag brake doesn't matter.
 
Well I placed an order for the torque master rock racer combo 27t from you guys a couple hours ago. My name is Guy. Thanks for the help.
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

Hey Mr.Holmes. Jus wanna say awesome products and definitely awesome service. So I recently bought a 11t armature for my crawlmaster pro. When I ordered the armature luckily I also ordered extra brushes. Ever since installing this armature setup ive been killing brushes after every run . Any idea why this might be happening and I was also wondering which brush set would you run in a motor like this since you have like 3 different brush options. Im running this setup on 2 and 3s only. Thanks for the help.
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

First try setting the timing between 12 and 24 degrees advance. That should help. Faster motors eat up brushes faster. Replacements are the standup soft copper type.
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

Ok awesome I will try that and I will be ordering those brushes right now. Oh and does it matter if I'm running a two speed trans so that's why it's killing brushes faster since its spinning super fast ?
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

i am interested in your crawlmaster torquemaster combo, how can i place an order?
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

hi John, angelo from Angelo, i'm going to build a Xr and i would to use 2x micro SideWinder with crawlmaster 16t.
are there any issue of overheating going at 3s with external bec and 13t pinion?
with a 5lb xr have i problem of drag brake with crawmaster?
thanks a lot
 
Same question as Angelo, but running mambas micro on my XR, any overheating issue with CM 13t on 3s with 14 or 13 pinions ? Any advice ? Thanks in advance...
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

With short runtimes like in a competition, you won't have heat problems. You will notice a loss in drag brake VS using a larger ESC.


If using the micros for fun playing, just keep an eye on the temps and stop if the ESCs hit 160f.
 
Re: Crawlmaster 540 Brushed motor Sale thread- The low end King!

I have sent 2 emails, 1 through rcc the other through your website and still have not gotten a reply. I would like to order 2 motors but am unsure which 2 best fit my application.

please let me know if there is another way to contact you.


thanks,

L.R.
 
You must log in or register to reply here.

Similar threads

JatoTheRipper
TRX-4M Motors
Replies
19
Views
3K
Saltrock
S
R
Hobbywing QUICRUN Fusion Pro 2300kV - 2S or 3S?
Replies
17
Views
3K
UZI4U
UZI4U
H
12v Mercedes AMG 6x6 by Voltz Toys
Replies
3
Views
222
HVACTeacher
H
J
Hobbywing 1080 ESC Motor Limit 2s and 3s
Replies
6
Views
2K
mikemcE
mikemcE
S
1/12 WW2 DUKW - Amphibious King Kong CA30 Build
Replies
12
Views
1K
SpareParts
S
Back
Top