-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
DLUX Swamp Squatch
- Thread starter DickyT
- Start date
DickyT
I wanna be Dave
DickyT
I wanna be Dave
DickyT
I wanna be Dave
A little blue loctite and the knuckles are together.
Note, if you are running rpm arms you will need to clearance the knuckle or arm a little for full throw, and if you run STRC C's you will need to clearance the upper and lower grooves shown in this pic. It fits and works with stock C's and arms just fine.
Note, if you are running rpm arms you will need to clearance the knuckle or arm a little for full throw, and if you run STRC C's you will need to clearance the upper and lower grooves shown in this pic. It fits and works with stock C's and arms just fine.
Attachments
SteveC6R
RCC Addict
I think the arms are on backwards based on Erik's thread pics.
DickyT
I wanna be Dave
You are right, and I have done a bunch of grinding for nothing. Hahaha! Good thing I don't care what it looks like, only that it works!
SteveC6R
RCC Addict
I was hoping I caught you before you started!
DickyT
I wanna be Dave
Happens to everyone, it's not a mistake, it's personalizing "thumbsup"
SteveC6R
RCC Addict
Won't be able to see it with the wheels on anyway. "thumbsup"
DickyT
I wanna be Dave
Isn't my first, won't be my last, and this is no show buggy, so all good here! The RPM arms do need the part that flanges out ground flat with the rest of it though!
DickyT
I wanna be Dave
DickyT
I wanna be Dave
Ok, a little redemption time! I could build a diff blindfolded, and this went very smooth! Great design Erik!
DickyT
I wanna be Dave
\m/ My idiocy aside, very nice stuff Mr. DLUX!
DickyT
I wanna be Dave
Shiny things make me happy!
Sh0rtBus
RCC Addict
Coming along nicely!
Looking good Dicky!
DickyT
I wanna be Dave
Thanks guys, and a special thanks to Erik for the opportunity to test the open diff! The stubs are very nicely done and should certainly be a good option for those that want the ofna beef with diff function. "thumbsup"
Rock-Lockster
Pebble Pounder
Plan on going to the tekin HD, I'm running the 3300 and its over heating and I'm down on power. looking at our build your at least 2 lbs heavier to boot.
DickyT
I wanna be Dave
How are you geared? I have had the 3300 in my wraith for 2 years, it is 2lbs heavier than this should be due to wheels and weights, with no heat issues.
If I blow the motor up so be it, I'll go HD then! But for now I have sunk all my available extra cash into this.
