Driveshaft upgrade

[mgputer]

Those look nice. How do the internals compare?

They are very similar to the junfac. The only thing I didn't like is they didn't come with pins for the diff end but the stock fit.

Sent from my Vivo XI+ using Tapatalk

 

[rag6]

These are what I use. They work really well and only $32.

https://www.amazon.com/Vaterra-Blaz...gateway&sprefix=ascender+drive,aps,187&sr=8-2

It says on that page that the fronts are longer than rear... Are you sure those specs are accurate? If not I ordered wrong ones

 

[mgputer]

It says on that page that the fronts are longer than rear... Are you sure those specs are accurate? If not I ordered wrong ones

The listing is wrong. The short one is for the front.

Sent from my Vivo XI+ using Tapatalk

 

[Damond]

What size Junfac driveshaft did you use on the Ascender k5 ?

 

[druz]

What size Junfac driveshaft did you use on the Ascender k5 ?

I have them on my K-10...

I don't have the size offhand, but give me a few and I will see what I can find....

 

[Natedog]

What size Junfac driveshaft did you use on the Ascender k5 ?

Check the SCX10ii driveshaft specs, they are similar to Ascender, should at least give a starting point. Do you have an LHS with crawler parts in stock?
"thumbsup"