driveshaft/yoke compatibility

[TxCruzr]

i need to be beaten over the head :roll:
I thought I had the right ones but I bought the wrong yokes to go with the wrong d-shafts.

I have these shafts
http://www.tcscrawlers.com/Traxxas-Jato-Half-Shaft-Set-2-each-5550-p-16158.html
and these yokes
http://www.tcscrawlers.com/4927x-Tr...ty-2-set-screw-yoke-pins-M4-10-2-p-16295.html

It looks like I need the 2.5 tmaxx shafts to go with those yokes?
What about what yokes I need to go with the shafts I have? Looks like I have jato shafts but these are the only yokes i can find relating to jato
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKMG4&P=7
Is that a pin holding the halfshaft in, and it can be pulled out?

or these?
http://www3.towerhobbies.com/cgi-bin/wti0095p?FVPROFIL=++&FVSEARCH=5458X&search=Go
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDDS6&P=ML

I feel so retarded, maybe I should order 10 of each

 

[anti42]

What about,
these shafts: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJH85&P=M
and these yokes: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJG59&P=M

-Z

 

[TxCruzr]

been there, done that. I can't keep those together in one piece with the brushless

 

[TxCruzr]

anyone

 

[Destroyer]

Jato shafts will work on Pede steel yokes, just pop the joint out of the Jato shaft.

 

[Jugger]

Is this strong enough?