Dual Esc Adapter-Dig, mixing, biasing, for MOST 3CH RADIOS

[losikid]

I honestly can't answer that, i have not dove that deep into the c-code, or into how exactly these operate, i just do the microscopic soldering with a massively huge soldering iron tip :ror: although i have the techniuque down, till i can get a smaller iron for my 936 station, i have the 908 iron, which has no 1/32 or 164" tips.

Greg (wantAsummit) may be able to answer this, if he doesn't chime in in the next day or two (i'd imagine he'd check up on me) it wouldn't hurt to send him a pm, or ask on the tech thread in the elec section, i believe i have a link in my first post.

But i think its safe to assume it should work that way, you may be able to set the step rate in the radio as well...possibly

 

[losikid]

Hey guys i made an oops when i was speed soldering, so i have even a better offer if someone wants to be my guinea pig to run through my cart system, 50% off. My opps doesnt' affect the adapter, the pots are just on the wrong side of the adapter.

But i should have 5 in stock in the next few days, all pre-orders will ship tomorrow. I should hopefully have 10 more late next week.

 

[annedecke]

I´d like to take 2 of the "wrong" ones plus the normal one I just preordered ... possible?

 

[losikid]

I have one opps, so i can give you 50% off 1, not two. I'll combined shipping with your current order.

 

[annedecke]

Sorry...missunderstood

PP done for 1 oops

 

[losikid]

Sorry...missunderstood

PP done for 1 oops

sending you a pm

 

[brazwewn]

I have a Futaba 3PMX radio and was thinking about one of these. Can you get proportional control with this radio and a WantAMix?

Wes

 

[losikid]

I have a Futaba 3PMX radio and was thinking about one of these. Can you get proportional control with this radio and a WantAMix?

Wes

Yes"thumbsup"

 

[brazwewn]

Yes"thumbsup"

This means I can also get rid of the Punk Dig. I like it, but this looks much smaller and has proportional. Do you have any in stock? I guess I would also need to buy two micro pros or Tekins, instead if my one sidewinder. I can feel my wallet getting lighter as I speak.

Wes

 

[losikid]

Yes this is ALOT smaller than a punk dig, and it will work with any two esc's so all you would really need is another sidewinder, i don't think it would take up anymore space with two sidewinders and a wantamix compared to a sidwinder and a punk dig :thumbsup:

I should have 5 in stock wednesday, if i get time to sit down tonight and tomorrow night to build them.

 

[brazwewn]

Yes this is ALOT smaller than a punk dig, and it will work with any two esc's so all you would really need is another sidewinder, i don't think it would take up anymore space with two sidewinders and a wantamix compared to a sidwinder and a punk dig :thumbsup:

I should have 5 in stock wednesday, if i get time to sit down tonight and tomorrow night to build them.

Just narrowed my chassis so two sidewinders will not fit now. I do want one of these though. Keep up the good work.

Wes

 

[swollen goat]

all pre-orders will ship tomorrow

Yay I'm pumped to get building :mrgreen:"thumbsup" Thx!

 

[WheelinKing]

PM'd

 

[losikid]

4 left i'll be ordering more parts Friday. All pre-orders shipped a few days ago, all other orders are going out tomorrow morning.

For those wanting to know how small this is...well its 11/16" wide, 1 1/16" long and 1/4" tall before shrink wrap. and weights close to nothing.

All future orders will need to go through my website, stock will be updated this evening http://www.overkillrc.com

 

[swollen goat]

Recieved it today - its beautiflly tiny :mrgreen: Thanks "thumbsup"

 

[swollen goat]

I just wanted to elaborate on tinyness of this thing :mrgreen: I will be able to fit my castle BEC, Spektrum Rx, and this dig all in the XR-10 reciver box!!

Very Cool - I'll have to upload pics when I get home.

 

[Charlie-III]

Order in & paid.....wiating on a confirmation on whether or not I got one of the last of this batch or waiting on next batch.:roll:

Also have other ESC's coming in so I have 2.

 

[losikid]

Order in & paid.....wiating on a confirmation on whether or not I got one of the last of this batch or waiting on next batch.:roll:

Also have other ESC's coming in so I have 2.

Your in, it'll ship moday

My website updates stocks automagicly.

 

[Charlie-III]

Thanks. I'll have a 2nd ESC next week as well."thumbsup""thumbsup"

 

[losikid]

ok i have 2 left, i'll have 10 more late next week.

I'm thinking about just leaving heat shrink off...let you guys adjust them then shrink em on...instead of cutting a slot out in the heat shrink for the adjustments. What do you guys think?