I'm wanting to get a electric heli for this winter,I been looking at the smaller electric ones that i could fly indoors....not like in the living room indoors but I have a 30'X40'X20' pole barn that i would fly it in. I was looking at this one http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMDN9**&P=ML but i would like to hear some opinions first before i go buying anything. If possible i would like to keep it at or under $200 RTF.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
First heli.
- Thread starter Mikekx65
- Start date
RedNeck Rc
Pebble Pounder
I took the cheap way and went with a walkera and a knock off walkera- http://www.xheli.com/wadr4rarecor.html
http://www.xheli.com/20wadr41rche.html
Space may get tight but you can hover around in that amount of space pretty easily. Make sure to get the training kit, you will save so much money and frustration if you get one.
http://www.xheli.com/20wadr41rche.html
Space may get tight but you can hover around in that amount of space pretty easily. Make sure to get the training kit, you will save so much money and frustration if you get one.
STANG KILLA SS
~THE SCALE SHOP~
no contest E-Flite Blade CX2
have you even flown a "real" (rc)heli before? if not then you need aLOT of sim time. but a co-axial like the CX2 anyone can fly.
o and dont waste your money on a tail motored bird, it'll never trim constantly, unflyable. shaft or belt driven tail is the ONLY way to go.
my fleet:
Lama V3
CX2
Blade CP Pro (sold in a week, tail motored bird are so inconsistant, crap)
T-Rex 450S
have you even flown a "real" (rc)heli before? if not then you need aLOT of sim time. but a co-axial like the CX2 anyone can fly.
o and dont waste your money on a tail motored bird, it'll never trim constantly, unflyable. shaft or belt driven tail is the ONLY way to go.
my fleet:
Lama V3
CX2
Blade CP Pro (sold in a week, tail motored bird are so inconsistant, crap)
T-Rex 450S
Crawlsalot
Rock Crawler
x2 on the cx2
FrankyRizzo
I wanna be Dave
Shaun
Rock Crawler
mongoose
Rock Crawler
STANG KILLA SS
~THE SCALE SHOP~
dad too, hes got 4 heli pads painted on the floor in the corners lol.:lol:
constantmotion
On the lookout for Rocks
X6
I had the RotoFly as a first Heli.....hard to fly as a noob. Its' to light to learn to hover. Sold it and bought a CX and hovers straight outta da box
nascarkeith
Rock Crawler
I started with a Blade CX and no sim time or experience. I had it figured out in a day or so. I totally demolished my original one day when I got a little brave outside. I bought a used on that looks and works like new on the bay for $73.
Skeeno
RCC Addict
x7
CX2 is a great indoor flyer. Easy to hover. Fun to mod.
CX2 is a great indoor flyer. Easy to hover. Fun to mod.
cartronicshn
I wanna be Dave
I am getting a cx2 , i have an older hummingbird and it's a pia to fly:roll:
trickedoutTLT06
RCC Addict
I think the answer is clear, get a CX2
aggressivellc
Quarry Creeper
Dude I own/run a hobby shop if you are loking for a easy to fly easy to get parts for heli (you WILL need parts I dont care who you are) its gonna be the CX2 hands down you can walk in just about any hobbyshop and find parts pls they are rock simple and they have recently upraded the so its an even better heli for the money.
Similar threads
