GT3B Hack Question and Answer Thread

[Krawler23]

Hi all, I’ve been out of the hobby for 10 years but am getting back into it. I have an old XR10 that has 2 esc’s to enable dig on it. I have a FlySky GT3B and have no idea how to program this to work for an MOA 2 esc crawler to enable dig, any ideas?

 

[CODYBOY]

Hi all, I’ve been out of the hobby for 10 years but am getting back into it. I have an old XR10 that has 2 esc’s to enable dig on it. I have a FlySky GT3B and have no idea how to program this to work for an MOA 2 esc crawler to enable dig, any ideas?

I did a search and found this thread: http://www.rccrawler.com/forum/elec...tup-after-hack.html?highlight=GT3B+setup+XR10

Not sure it will help you out. "thumbsup"
Ernie

 

[ferp420]

i was wondering if anyone had a lead on replacement 3pos switches my duel rate and 3rd channel.trim switches went out thanks

 

[OSRC]

Not sure on the switches, I bought a spare radio back in the day on the cheap just to raid for spares. Figured that would be easier than trying to track down individual components. I'm sure there's a compatible if not the same exact size switch out there somewhere, they are just basic contact switches...

 

[ferp420]

Not sure on the switches, I bought a spare radio back in the day on the cheap just to raid for spares. Figured that would be easier than trying to track down individual components. I'm sure there's a compatible if not the same exact size switch out there somewhere, they are just basic contact switches...

ya im hoping there was a sorce for the originals if not i might try some cheap ebay 3po micro switches

also thinking of picking up another one and maybe use this one for parts as its pretty beat up ive had it 5 years and i got it used for almost nothing cause the power switch was bad lol

 

[ferp420]

i was wondering if anyone had a lead on replacement 3pos switches my duel rate and 3rd channel.trim switches went out thanks

i bought some switches but they were huge and wouldent have worked anyway but i figured out why they dident work and fixed them and reinforced them so it shouldent happen again



pics

 

[KyleH]

I have a hacked Turnigy gtx3. I have no throttle on either vehicle that I have it bound with. Can anyone help figure this out. When I calibrate controller it goes from around 400-1050.

 

[OSRC]

Wow, went back and looked at the dates on this. I've been running this radio for 12 years! About 45 slots filled with almost all my RC's. Been though countless trail runs, 4 G6's, endless bash sessions, and hours of hot sun during on road time. Still working perfectly!

 

[kincer]

Wow, went back and looked at the dates on this. I've been running this radio for 12 years! About 45 slots filled with almost all my RC's. Been though countless trail runs, 4 G6's, endless bash sessions, and hours of hot sun during on road time. Still working perfectly!

I hear ya, I got two hacked radios a B and a C, one brand new in box never opened, been using the other two so long without issue.

Sent from my SM-S911U using Tapatalk

 

[cartronicshn]

I hear ya, I got two hacked radios a B and a C, one brand new in box never opened, been using the other two so long without issue.

Sent from my SM-S911U using Tapatalk

i currently own 3 gt3b, two of them hacked way back and no problems, i had the third non hacked radio new in the box until last january and that one started to give me problems with the throttle center, and it wasnt calibration, some electronics cleaner and problem fixed.:mrgreen:

 

[spookyseven]

I have a hacked gt3b that works fine when I drive alone. Anytime I drive with a group my winch runs full speed in. Sometimes this will happen the second I turn the truck on (radio is on first) but sometimes it acts like interference from other radios. It's mapped as a 3 position switch to the d/r switch on channel 4. Are there any ideas on what might cause this or how to fix it? Should I try adjusting the trim or is there something else to look at first?

 

[ferp420]

I'll take a wild guess and say try rebinding the radio and receiver
I know that's as bad as turn it off and back on but that's all I got lol

 

[DeB]

Hello guys
I would like to know if after the mod is possible to add a "lever" on sw3 instead of a 3 position switch.

Did someone made it?

 

[TacoCrawler]

Hello guys
I would like to know if after the mod is possible to add a "lever" on sw3 instead of a 3 position switch.

Did someone made it?

even if you changed to a "lever" it would still be a 3 position switch ?
Is that just more comfortable for you ?
Or do you mean to swap out the switch altogether for something more adjustable ?
This have something to do with this flash/update thingy ?

~just curious~

I have two of the FS GT3C 's and a FS GT5
But that ain't no help

 

[DeB]

I have succesfully installed a potentiometer instead of the ch3 push utton.
the radio works good and i had setup the dig function with the potentiometer joystick.
neutral position no dig, up.rear dig and down front dig, linear mix so it can underdrive til stop the axle.

just a problem, sometimes it seems to loose the setting.

did anyone had similar issues to loose settings?

thank you!

 

[ferp420]

I have succesfully installed a potentiometer instead of the ch3 push utton.
the radio works good and i had setup the dig function with the potentiometer joystick.
neutral position no dig, up.rear dig and down front dig, linear mix so it can underdrive til stop the axle.

just a problem, sometimes it seems to loose the setting.

did anyone had similar issues to loose settings?

thank you!

what switch or pot did you use for the mod


And remember pics or it didn't happen lol

 

[cartronicshn]

I have succesfully installed a potentiometer instead of the ch3 push utton.
the radio works good and i had setup the dig function with the potentiometer joystick.
neutral position no dig, up.rear dig and down front dig, linear mix so it can underdrive til stop the axle.

just a problem, sometimes it seems to loose the setting.

did anyone had similar issues to loose settings?

thank you!

Nice, any pics ? like ferp420 said....:ror:

 

[DeB]

here it is.

 

[ferp420]

I don't think I've ever seen a gt3c in such good shape lol mine looks like its been through a war compared to that thing
Nice mod too lol

 

[ferp420]

just a problem, sometimes it seems to loose the setting.

did anyone had similar issues to loose settings?

thank you!

Please explain is neutral drifting or is it forgetting the settings all together

Is it just the pot you installed or all settings