HeyOK's RC Electronics items (all in one place)

[step child]

another great item from Al i have several of his electronic switches in various forms and they all are great additions. i also want to personally thank Al for sponsoring our clubs upcoming Tough Truck Challenge event on Aug 24 we have got some cool switches to hand out. here is a link to the event

West Coast RC Crawlers

Thanks Al, HeyOK's for sponsoring the Tough Truck Challenge had a great time and walked away with this :mrgreen:....



Ordered up and have received your Winch Controller also.. "thumbsup"

 

[arevir]

does the DIM controller actually reduce the Volts on each step down?
if yes do you happen to have that data on each step and the Volts for 2s and 3s
thanks.

 

[heyok]

does the DIM controller actually reduce the Volts on each step down?
if yes do you happen to have that data on each step and the Volts for 2s and 3s
thanks.

The dim controller does not reduce the voltage with each step. It switches on and off rapidly in order to reduce the amount of power that reaches the lighting. This is the way most ESCs work too.

 

[heyok]

Added new item: http://www.rccrawler.com/forum/vendors-electronics/469172-servo-toggle-switch.html#post4545728

 

[arevir]

The dim controller does not reduce the voltage with each step. It switches on and off rapidly in order to reduce the amount of power that reaches the lighting. This is the way most ESCs work too.

Thanks!

Added new item: http://www.rccrawler.com/forum/vendors-electronics/469172-servo-toggle-switch.html#post4545728

wow you dont stop coming out with cool products! "thumbsup"

 

[Fumbles]

I've got to give Al a huge Thank You ! I've been bugging him quite a bit about the wiring on my latest project and he's been nothing but super helpful and ultra patient with my not so brainiac questions. Not only do you make some awesome electronic products but you have the patience of an angel. Thank you !

 

[CRAWLER-DAD]

I've got to give Al a huge Thank You ! I've been bugging him quite a bit about the wiring on my latest project and he's been nothing but super helpful and ultra patient with my not so brainiac questions. Not only do you make some awesome electronic products but you have the patience of an angel. Thank you !

Al is a great guy !! He listens to the needs of the consumer and does his best to accommodate there needs!!

 

[Richterat83]

LED and winch controllers just came in! Guess I know what i'm doing tonight! lol

 

[heyok]

Added new item: http://www.rccrawler.com/forum/vend...-dim-external-powered-output.html#post4622679

 

[vegas1973]

hi i just got tzi beefy winch and have a 4pk whats the best winch controller you sell for this setup thanks

 

[Trump1]

hi i just got tzi beefy winch and have a 4pk whats the best winch controller you sell for this setup thanks

Al's on vacation (or holiday if you will) until the 18th.

I have a TZI Beefy winch which I run with one of Al's Relay Winch Controllers. I use a Futaba 4PL. I was using the Slide Switch (SW2.SLD), but recently reconfigured the controller to use the Digital Trim 4 (DT4) and controlling the winch works so much better.

I hope this helps you.

 

[afrofroggy]

Crikey Al payment sent

 

[rcwolf]

I'm probably just being dense but I'm having some problems figuring out what I need. I've searched this forum, the internet and watched videos..


I have an old airtronics M11 with a spectrum tx module and a spectrum SR3000 receiver and Holmes hobbies brxl esc. I'm using a 3s battery and I'm wanting to hook up a 2.4 ghz 3racing winch. I don't have a bec yet but was planning to get the castle creation 10amp. Is the 4 amp relay output winch controller with jst plug the one I need?

Thanks!!

 

[heyok]

I'm probably just being dense but I'm having some problems figuring out what I need. I've searched this forum, the internet and watched videos..


I have an old airtronics M11 with a spectrum tx module and a spectrum SR3000 receiver and Holmes hobbies brxl esc. I'm using a 3s battery and I'm wanting to hook up a 2.4 ghz 3racing winch. I don't have a bec yet but was planning to get the castle creation 10amp. Is the 4 amp relay output winch controller with jst plug the one I need?

Thanks!!

Hi,

Thanks for checking out my electronics!

You typed "2.4 ghz 3racing winch." If you mean a 3racing winch, yes, the 4 amp relay output winch controller with JST plug will work for you. You mentioned that you run a 3S battery so this controller will put the full 3S voltage to the winch. Might be a little much for it, but people do it all the time. Otherwise, use the
http://www.rccrawler.com/forum/vend...ler-using-3-position-transmitter-channel.html
and it will put receiver voltage to the winch (as long as you don't run more that six volts to your receiver. Hope that helps. Feel free to send me a PM and we can work out what is best for you.

Al

 

[blakeguski]

Hey "heyok," how much are the controllers with the switching output for the 2 posi. switches?

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[heyok]

Hey "heyok," how much are the controllers with the switching output for the 2 posi. switches?

Sent from my SAMSUNG-SM-N900A using Tapatalk

http://www.rccrawler.com/forum/vend...ontroller-radio-2-position-third-channel.html

$30

sorry... gotta run out.

 

[norcalmk2]

I would just like to say that Al is awesome at talking through a problem and troubleshooting. Over the span of a few emails back and forth found out a few things and found the problem. Thanks again Al you rock.

Its awesome customer service that brings people back to great products! Keep it up.

Sent from my XT907 using Tapatalk

 

[Awesome-Sauce RC]

I'm probably just being dense but I'm having some problems figuring out what I need. I've searched this forum, the internet and watched videos..


I have an old airtronics M11 with a spectrum tx module and a spectrum SR3000 receiver and Holmes hobbies brxl esc. I'm using a 3s battery and I'm wanting to hook up a 2.4 ghz 3racing winch. I don't have a bec yet but was planning to get the castle creation 10amp. Is the 4 amp relay output winch controller with jst plug the one I need?

Thanks!!

the 3racing winch on 3s is a beast!!!:mrgreen: i have been running mine like that since last year and its still going strong, and according to my multimeter it just barely breaks 1A in a full stall.

but still able to pull my 4 year old in his little tikes car lol 3S power"thumbsup" lol

 

[mjderstine]

just placed an order for a relay winch controller on your site. look forward to getting it in ! love your stuff.

 

[heyok]

just placed an order for a relay winch controller on your site. look forward to getting it in ! love your stuff.

Thank you for the order, Michael!
Happy to make it for you.
Al