Brainstain
Nope..
I didn't get an email either, so I was about to ask the same thing. I only had a 7T and a MM. But I didn't know where I was in the "line".:lol:
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
HH Cobalt Puller- Reborn page 35!
- Thread starter JohnRobHolmes
- Start date
I didn't get an email either, so I was about to ask the same thing. I only had a 7T and a MM. But I didn't know where I was in the "line".:lol:
cartronicshn
I wanna be Dave
Hi JRH, just wanted to know if my order shipped out, i didn't get an e-mail, thanks.
I would recommend a 1500 2 cell 15C minimum, and 2100 3 cell 15C min. (assuming lipo)
You should be coming up tomorrow. I have hired some help for 5 hours to get the rest out.
You should be covered tomorrow as well.
Got shipped out in today's mail. I missed the Saturday cutoff.
If all goes well every backorder should be taken care of by tomorrow evening. School is just taking a lot more of my time that I had planned for right now, it is like I have two full time jobs :lol:
cartronicshn
I wanna be Dave
"thumbsup"
Mortimer Snerd
Rock Crawler
Kicking around preordering a 7t, but am wondering if you have any plans to do a 10t run? The wheelspeed in the 7t looks awesome, but I have a hard time imagining that I'll need all that in a crawler. I'd rather preserve the run time. Would I see much difference? As always, thanks for taking the time to answer our zillions of questions. BTW, got my lipo in the mail today, and it looks like it'll suit my needs great. Thanks!
I am getting quotes from the factory for some 10t armatures, just waiting to hear back. If you don't want so much wheelspeed, just use lower voltage or gear down if possible. I can guarantee that you will find a use for the wheelspeed when you have it though.
Mortimer Snerd
Rock Crawler
I'm sure. :lol: I don't really want to buy new batteries, as I've got a fair amount of $$$ invested, and I really like the speed. Can't gear down much lower. I'm running Maxx driveshafts. I might try to shave them down a little, but I'm concerned about weakening them. How much faster is the 7t?
It is about 2300kv I think, maybe 2200 unloaded. It should be on my website. A bit more than twice the speed of a 55t.
Mortimer Snerd
Rock Crawler
Sorry, I seem to have my noob brain on. If I remember correctly the 10t is 1800kv? It'd be a little slower than the 7t, a little better run time, and still about 10,000x times more parts breaking torque than a 55t?
Yep, correct on all accounts.
Mortimer Snerd
Rock Crawler
Thanks. I think I'll hold out for your next run of 10t pullers. I don't want to give up too much run time....Of course, then I'll be thinking "gee, if only it were a little faster" :roll: Besides, I'm really curious to see what your new 10t will look like. Thanks for taking the time to answer my questions. Again.
Get ready for a wait. It could be months before I can get the factory to make armatures, and then you will have to buy a can too. The redesign is taking even longer, and so far multiple designs have fallen through for factory or production reasons.
Mortimer Snerd
Rock Crawler
I'm assuming you're talking about a long wait for the current 10t cobalts. Any alternate suggestions, given what I'm looking for?
You could get a 25t 540 Handwound. It would load down a bit more than the Cobalt Puller so it wouldn't spin quite as fast under load. I could also get a 30t wound up if that was too fast for you.
http://holmeshobbies.com/product.php?productid=199&cat=17&page=1
http://holmeshobbies.com/product.php?productid=199&cat=17&page=1
Mortimer Snerd
Rock Crawler
Cool, I'll give it some thought. I've been eyeballing those. Thanks!
bigflex
I wanna be Dave
so is the time frame on the 7t pullers still about 2 weeks out for the next batch?
Best guess, yes. I will put more up for sale here in the next few days since the motors are on the way already.
toytech93
Quarry Creeper
hey JRH, I was curious if a 10T puller could be ran on a Novak crawler ESC ??? The rooster crawler has a 27T limit. If it can't, Whats another ESC that has a drag brake at neutral ??
It would work fine on the Novak RC.
