• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Hi guys

Josein06gli

Newbie
Joined
Mar 9, 2016
Messages
29
Location
SAN DIEGO
I was given an Axial wraith Spawn for my Bday from my wife. Here is the slow transformation. So far I've done a 400oz Savox Servo, Gmade shocks with reservoir, strc, steering links, strc upper and lower links, strc diff covers, strc servo mount and rear and front link holders, strc lockers in rear, strc knuckles, strc tranny Plate, strc motor plate, Robinson Racing idler gear and bottom diff gear, got a poison Spyder shell, cut the good and made it hinged. Future mods are Vp methods, proline tsl tires, dig brake and 4 channel radio, motor, battery relocation and much more. [emoji2] it's not a shelf queen. She gets used. I'll post more pics as I get new stuff.

566f2089da9f546aa37caf496942d2cf.jpg

767cf22446b8dc8a8a0440351ac06e78.jpg

72fbcefae1d83624f49513e08e2529aa.jpg
6ab211f89921a17db30579c39d372a11.jpg

5daceaa75a8781b69aa11e78c990540b.jpg
 
Last edited:
They're great shocks. The ones it came with leaked on the 3ed drive lol. Figured it'd be wise to replace them

Sent from my SM-G930P using Tapatalk
 
Got some wheels over the weekend and some tires over the weekend. VP Methods and Proline 2.2 super swamper tsl sx and some other odds and ends
8e9ec7a4fc3c4d1b5efd747dff465cd1.jpg
7750547de2193017e375fe9cd541677b.jpg
 
Also got a new radio and rx today and my dig brake came in. I plan on using the original steering servo for that. I'll post pics in a few
 
Trucks looking good, I like the wheels and tires. I have the DX4c and have no complaints, think it's a great bank for your buck TX.
 
I just setup the dx4c. Wasn't too bad. I did this relocation kit for the battery and moved it and the esc up forward. Hard case 2s lipo fits no problem. I did have to get some servo extenders for esc and steering. I wrapped those up with black tape and tried to tuck them in the chassis
ccd2d4f05c24266325d6957f6c0d4849.jpg

7af5648c8828a765362f25bbc8dc44d6.jpg

ab592dde0b39c640e5f6481986d958ae.jpg

483b2d3a5ddee21902b47c2104874597.jpg

85aefe213b4cc36a5cde66b3a8e864ad.jpg
 
So on my last adventure I bent the strc steering link, the bigger longer one and lost a lower link. So today my new rc4x4 stainless steel links showed up and I put them in. The stainless steel although thinner is heavier and a lot stronger.
a25660dfd148ca1efdcdb855b8fec710.jpg
7fbb90e9f778bc839d922107029e2211.jpg
2bfb0f46881b230b016c1d9e604bcafd.jpg
 
Back
Top