I've run mine on 7.2v 1500 mah stick packs, it does good also. Has more punch with the 3s lipo. I can get about 20-30 minutes of crawling time (not wide open) out of the stick pack.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Hobby Wing EZRUN crawler system
- Thread starter 02tac
- Start date
I've run mine on 7.2v 1500 mah stick packs, it does good also. Has more punch with the 3s lipo. I can get about 20-30 minutes of crawling time (not wide open) out of the stick pack.
Badmuthatrucker
Quarry Creeper
Ernie, your brake issue is in that stock motor. If they'd used a 540 size stator and coil pack, they would of been fine.
What motor would you suggest I use? I traded for this truck a couple months ago and its my first brushless system, as well as lipo battery so I don't know too much about them besides what I've read.
Badmuthatrucker
Quarry Creeper
Something a little like this:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11879
It's $8... Worth trying. But, spend $25 on a known brand at a hobby store is more worth trying, if you know what I mean.
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11879
It's $8... Worth trying. But, spend $25 on a known brand at a hobby store is more worth trying, if you know what I mean.
02tac
Pebble Pounder
This might be an option to consider - http://www.hobbypartz.com/96m205-3660-1025kv-23t.html - as it is a true 540 size motor. I hav ethought about it, but for now the motor that came with the HW system does what I need it to do.
peebles24
Newbie
Awesome info there Badmuthatrucker will definitely be very helpful and the pricing on those type are sweet.
The tacon motor won't start up in a bind. You have to have an outrunner to produce enough torque for sensorless startup.
Shameless plug: My Revolver motor was extremely popular as a sensorless outrunner for many years. It bolts up like a standard 540 and uses standard pinions http://holmeshobbies.com/product.php?productid=117&cat=0&page=1
Shameless plug: My Revolver motor was extremely popular as a sensorless outrunner for many years. It bolts up like a standard 540 and uses standard pinions http://holmeshobbies.com/product.php?productid=117&cat=0&page=1
peebles24
Newbie
I don't mind shameless plugs always nice to know where to find the right stuff 8)
Badmuthatrucker
Quarry Creeper
Sorry John, didn't realise you still had outrunners. I'll get me one I think :lmao:
***Edit***
I just bought two
***Edit***
I just bought two
Last edited:
02tac
Pebble Pounder
Jersdunz
Newbie
There are hobbywing motors made low kv specifically for crawlers I have never ran one but can definately vouch for alex at value hobby all my orders there have been fast and accurate..
http://www.valuehobby.com/product_details.php?category_id=32&item_id=196
http://www.valuehobby.com/product_details.php?category_id=32&item_id=196
Slow motor does not make it a crawler motor. Probably just as good as the Schumaker "crawler" motors that were just slow two pole sensorless inrunners.
Jersdunz
Newbie
so since there about the same price the revolver would be the better way to go then.. Sounds good to me.
Considering they list it as sensorless, I would say so.
I just wanted to say I pick up a Revolver from the classifieds and got in hooked up last night. Keep in mind I'm currently on a 1500mah 7.2V standard battery.... I can't believe the difference it made. I have great brake power now. Wheel speed is faster, I'm running 87T-14T trans gears. The stock EZRUN motor was slow then picked up ( is that cogging? ), the revolver just goes. I did get in a hard bind and popped a Traxxas stampede drive shaft. I believe once I do MAXX shafts I should be good to go.
The Revolver outrunner also has a sound of its own...... I like it myself.
I highly reccomend anyone running the EZRUN crawler brushless to pick up a Black Revolver outrunner from Holmes Hobbies.... they are the bomb.
bugman72
Quarry Creeper
Hey, JRH...what size ESC would you recommend then with the Revolver? Would a 35A be sufficient on a lightweight 2.2 (my old BMVII) running 2S 1300Mah 40C Lipo? I wasn't sure what the load draw is on your motor.
yes indeed, a 35a ESC would work well. You could even get away with a 25a model with proper gearing and temp checks.
bugman72
Quarry Creeper
I might have to go this route then. Once HobbyPartz gets the 35A back in stock (they say in less than 2 weeks), I can get it as well as your Revolver for around $65 as a package. Not a bad price for a capable brushless setup. "thumbsup"
Now, when are you going to find a new supplier for the brushed motors for my Losi Mini?
Or, do you know of a good outrunner that I could run in it?
Now, when are you going to find a new supplier for the brushed motors for my Losi Mini?
Or, do you know of a good outrunner that I could run in it?
A little 22mm diameter outrunner would do well, but it has to be fast to hit the speeds you need. I haven't really looked into them yet. Something around 4000kv.
