HVAC's Knightrunner Project

[HVACTeacher]

Hey all!
I picked up a Knightrunner shortly after they came out. I really liked the looks of it, I'm sure everyone here knows how that goes.
I swapped out all the electronics with the exception of the motor, I have a ton of nice motors, I don't know why I stopped short there.
Seeing all the cool stuff on Club 5 I think I ordered every tid-bit they make for this bad boy, love how it turned out!
I have a Castle ESC, CC BEC, Savox WP servo (Can't remember M# off the top of my head), H.O.G servo winch by Precision RC Works, Sanwa RX and a lighting kit by Club 5. Stock tires on RC4WD steel beadlocks.

I've made some suspension changes since the photo of the wheel popped around. I added some bits from Bowhouse that I had prior to the IFS2 kit coming out.
Unfortunately the hardware for the Bowhouse stuff is all loose and I need to redo it
I thought I used Loctite, but at the time I didn't have the nice gel tube that I would normally use. Oh well, live and learn.

I don't have any pics of the lid off, but here it is.

https://imgur.com/a/CZGinv7

 

[HVACTeacher]

Here's some pics with the lid off

https://imgur.com/a/FrDNfYU

 

[HVACTeacher]

https://imgur.com/a/WJYfsxz

 

[HVACTeacher]

Parts list -

Club 5 Racing Ezon light kit
Club 5 Racing Grille
Club 5 Racing Third brake light
Club 5 Racing Complete inner fenders w/ rock lights
Club 5 Racing Magnetic body mount set
Club 5 Racing Tonneau cover
Club 5 Racing Dual exhaust
Club 5 Racing Steel front skid
Club 5 Racing Husky hi clearance links
Power Hobby brass rear diff cover
Bowhouse RC Aluminum servo plate
Bowhouse RC N2R Aluminum steering bell crank
Bowhouse RC Bump Stops

https://imgur.com/a/pJqS6rw

I really need to redo the front end as I mentioned in my op.

Things down the road will be the IFS2 front end after I try this out a bit.