JC Auto Design - SCX10/AX10 Axle Truss, Panhard and CMS options

[monkeyracer]

How long till the next batch of parts are ready to ship? Just Curious. Oh and I just received The rest of the parts for My wraith axle just wanted to have it all together so you have everything you need, It will Be mailed today.

You have some prototype parts in your batch, so I will be printing those over the weekend for shipping Monday.

Generally, parts are made on an As-Ordered basis, rather than a bunch of parts at a time (exceptions would be the new re-release of the RULR V2's in nylon). As in the first post, the intention is to have any order of normal production parts shipped within 7 days of payment. Special order, or prototype, etc, parts will take just a little longer than that, just due to the extra processing steps.

I'll be updating this thread very soon with current options and pictures to help explain what is included in each combo, etc.

 

[monkeyracer]

First couple posts updated with new products, combos, and up-to-date information on the different options available.

Any questions, please feel free to post up here or send me a PM.

Thanks everyone for your support and suggestions!

 

[racin707]

I love this,gotta get the wife on board and I'll be sending you a pm

Sent from my VS980 4G using Tapatalk

 

[jh1985]

You have some prototype parts in your batch, so I will be printing those over the weekend for shipping Monday.

Generally, parts are made on an As-Ordered basis, rather than a bunch of parts at a time (exceptions would be the new re-release of the RULR V2's in nylon). As in the first post, the intention is to have any order of normal production parts shipped within 7 days of payment. Special order, or prototype, etc, parts will take just a little longer than that, just due to the extra processing steps.

I'll be updating this thread very soon with current options and pictures to help explain what is included in each combo, etc.

Well I thank you for the update. Im very excited to see your work 1st hand. Ive showed you pics off to all my friends. Vendors like you make our hobby just that much better. Thanks

 

[CBR74]

I am happy to report that we gave the rear truss and V3 RULR's a thorough thrashing at comps tonight and got 2nd and 3rd respectively. (My 11yo and I compete with the same G6) I was also able to climb a section of the course that was impassable prior to the RULR's.

"thumbsup""thumbsup"

 

[littletoyboy]

I just ordered a rear 4 link truss from you. Thanks for the great products.

 

[monkeyracer]

I am happy to report that we gave the rear truss and V3 RULR's a thorough thrashing at comps tonight and got 2nd and 3rd respectively. (My 11yo and I compete with the same G6) I was also able to climb a section of the course that was impassable prior to the RULR's.

"thumbsup""thumbsup"

Glad to hear everything is holding up as it should! Thanks for the update "thumbsup"

I just ordered a rear 4 link truss from you. Thanks for the great products.

Thanks for your order! Printed, and ready to ship first thing tomorrow.

 

[ssdub33]

R u still gonna do dual cms mounts fot us with a cms and servo winch

 

[rookie101]

Had a package of awesome show up today, look awesome!

 

[monkeyracer]

Had a package of awesome show up today, look awesome!

They do look awesome... Now we all want to see some installed pics!

 

[monkeyracer]

R u still gonna do dual cms mounts fot us with a cms and servo winch

Sorry for the delay in answering this... kind of slipped under my radar...

The intention is that the above set-up would be how you would mount a steering servo along with a winch servo. The nice thing about the new CMS is it has a place to mount a battery, as well as two spots designated for rod-ends so you can route your winch line to the front of the vehicle. I will try to get a good pic of this over the weekend.

I was testing a side by side version, but it just became too hard for most set-ups to get the winch positioned right.
I can make custom mounts as well, so if you (anyone) were interested in a somewhat different set-up, please let me know.

Hopefully this answers your question.

 

[jh1985]

any link lengths for cms and servo link

 

[monkeyracer]

any link lengths for cms and servo link

This may vary depending on your set-up, but my G6 JK uses 90mm eye-eye measurements for both links (equal length parallel is the best geometry for these).

 

[KMS]

Any plans for us Wroncho owners that want to go CMS ????? Sometimes it's nice to buy a part off the shelf....."thumbsup"

 

[monkeyracer]

Any plans for us Wroncho owners that want to go CMS ????? Sometimes it's nice to buy a part off the shelf....."thumbsup"

I have something I made up for my Project Wringo build that uses SCX10 axles and a wraith chassis.

The servo mount would replace the "electronics brace" as a location for the servo mount. I can post a pic of the mount later this afternoon.

 

[awdtsi]

Sorry for the delay in answering this... kind of slipped under my radar...



The intention is that the above set-up would be how you would mount a steering servo along with a winch servo. The nice thing about the new CMS is it has a place to mount a battery, as well as two spots designated for rod-ends so you can route your winch line to the front of the vehicle. I will try to get a good pic of this over the weekend.

I was testing a side by side version, but it just became too hard for most set-ups to get the winch positioned right.
I can make custom mounts as well, so if you (anyone) were interested in a somewhat different set-up, please let me know.

Hopefully this answers your question.

Any pics of how this mounts up to the chassis? I'm curious how you ran the winch line. Thanks

 

[monkeyracer]

Any pics of how this mounts up to the chassis? I'm curious how you ran the winch line. Thanks

I can try to get some good shots of this tomorrow.

 

[monkeyracer]

Any pics of how this mounts up to the chassis? I'm curious how you ran the winch line. Thanks

I can try to get some good shots of this tomorrow.

Sorry this took a little longer, but here are some pics to show how this would be set-up:

I haven't finished setting my rig up, but the idea is the winch line runs through the rod ends then out the grill through a dummy winch mounted on the bumper. It would be possible to mount the winch upside down and run the line under the mounts through the bumper as well.

You can also see in the pictures the space to put the battery or electronics. I am going to put my battery on these mounts and mount the ESC and radio to the sliders. (This version is a prototype, the production mounts will look a little different than these.)

Hope this helps visualize this. Let me know if there is anything else you would like to see.

Thanks!

 

[808DA6]

LOVING these products. I will definitely be placing an order soon.

 

[natskiboy]

You still making the CMS and battery mount for the SCX10? Let me know