robbo
Pebble Pounder
Perfect fit, easy install and no squat. Thanks!
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
- Thread starter monkeyracer
- Start date
muddywaters
RCC Addict
Got mine in as well Jens and they do fell a lot better than the first batch and I know they work very well. Thanks Jose..."thumbsup""thumbsup"
monkeyracer
I wanna be Dave
Extended Version Now Available!
SCX10 Rear Upper Link Risers (AKA RULR)
- Super Light - Weighs only 3 grams for the pair!
- Improves performance on uphill climbs - typically 2 degrees better.
- Works with stock SCX10 Chassis and skid, no modifications necessary!
- Raises your mount up 15 mm and back about 8 mm to clear large motors and large drive shafts.
**You may have to change your rear upper links to accommodate the extended mount. A 5 mm shorter link is recommended. - Stronger than the ABS versions - Nylon will stand up to much more abuse!
- Keys into chassis to prevent rotation
- Extremely easy to install, requiring no drilling and minimal effort.
Extended RULR - Nylon (Dyed Black Plastic) - $10 per pair
Jeckler
Rock Crawler
When will you have the standard ones back in stock?
monkeyracer
I wanna be Dave
Hopefully very soon.
I had another motherboard explode on me, so I'm having a replacement sent. As soon as that is here and installed, I will resume production.
Pic of the motherboard:
captainmorgan
Rock Stacker
Are you back up and running? I'm looking for a status on my order that I placed back on 3/21.
monkeyracer
I wanna be Dave
Just emailed you.
The printer parts came in Wednesday, and I have been calibrating and setting everything back up to print correctly. I should be back up to full production by the beginning of May (after I catch up on pending orders).
goatz
Newbie
I purchased 2 sets of your upperlink risers for my scx10 in May sometime. My second or third trip out on them one of them broke right where its machined out for the frame, so I grab the second set new in the bag and its broken too in the same spot.
monkeyracer
I wanna be Dave
At the end of April, Early May I was testing a new material for these, but they weren't supposed to make it through normal orders. It is likely you got a couple in the test material by mistake.
Send me a picture through PM, along with your address, and I'll get some replacements sent out.
jamesthe1v
Quarry Creeper
dont know how there gonna hold up but just put a set on and had to do some creative thinking but amazing lines i had to fight and work for before i walk right up now with barely a tire lift "thumbsup"
Sammy J.
Quarry Creeper
One of my SCX10 rulr broke in half yesterday. One on my Ascender broke 2 months ago.
I wonder if 3D printing material just isn't strong enough for this application.
I wonder if 3D printing material just isn't strong enough for this application.
monkeyracer
I wanna be Dave
I have been testing a different method of printing these that should prevent these types of breaks. Send me a PM with your info and pics of the breakage, and I'll send a set of the updated RULRs out for you to test (both SCX and Ascender).
For others with breakages, I want to make sure the update solved the issue, and if so, I'll be offering free replacements to verified purchases and proof of breakage. Stay tuned for that info...
