-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Jrobs Project. Fj cruiser!!
- Thread starter Jrob
- Start date
Jrob
Quarry Creeper
I got all the links cut down, I took an 1 3/4" out of the wheel base. I'm gonna get the links drilled and tapped tonight and hopefully have this baby sitting as a roller by bed time 
Jrob
Quarry Creeper
Jrob
Quarry Creeper
I got the lower links on. I went with some different ones on the rear in the pictures for now. But I am going to cut the rears down another 1/2" that I already made and it will give me the hi clearance links all the way around on the bottom and I will achieve the 10"wb I decided to go with. Here are a few shots
and I will achieve the 10"wb I decided to go with. Here are a few shotsAttachments
Jrob
Quarry Creeper
I had to stretch the wheelbase back out to 10 1/2" to make my driveline work! Lol so here it sits at the end of day 2
Attachments
Jrob
Quarry Creeper
Well I haven't had too much time to work on the fj with my lil mans bday and Easter, but I decided to use my 2.2 vanquish rockstars on 1.9 flat irons. I think it looks cool and should perform awsome here are a few pics
Attachments
Jrob
Quarry Creeper
Thanks!! There not too bad to do, just the back getting the bead on is a lil tricky but with patience you can do it!!
