Jutt's JK Rubi RTR

[juttsvw]

Jutt's JK Rubi HardTop RTR

Hello and Welcome

Just a few photos of what stage I am at in my build. Waiting to break parts b4 I start to replace them. Loving the truck so far.

Vaterra Twin Hammers beadlocks and tires
Jeep JK Rampage Recovery Bumper front and rear
Tough Armor Side Steel Sliders
Pro-line PL-C Floor Pan
Jeep Wrangler UNlimited Rubicon Roof
DinkyRC JK Swing Out Tire Rack
Fly Sky FS-GT3B
Junfac Gmade Gmade TS02 Scale Shocks
Screwz Stainless Steel Screw Kit
Castle Creations SV3 combo 4600kv "not installed yet"





Comments Welcome!

 

[Abrown83]

Looking good man!


How are you finding those shocks?

 

[mszymanski25]

Are those rock sliders something that you had previously? I am ordering a JK kit and I want to mount some batteries to them, but they are out of stock everywhere. Just wondering if there is a place I can order them from.

 

[urnot2brightru]

Nice jk. How are those tires working so far?

 

[Shinjari]

Yeah those twin hammer tires any good for slow crawling?

 

[juttsvw]

Shocks feel alot like the RC4wd king shocks. Little bouncy but strong enough to hold the frame from hitting the axle.

The side rock rails I got from rc4wd about 2 weeks ago. Alot of things are sold out that I want!!

Twin Hammer tires. Well they are a little stiff. Really wouldn't suggest for hardcore crawling. The foam needs trimmed out for that. Tire compound seems to be good. I mainly use my truck for trailing in the woods rather then crawling.

Anyother questions please feel free.

 

[briang]

any pics with the body off i want to check out the proline floor pan..

 

[juttsvw]

any pics with the body off i want to check out the proline floor pan..

I'll get some sunday for ya. I had to cut alot off all the sides to make it work. The JK body is much thinner.

 

[wmax99]

the back rac¸k is a great idea love it great job

 

[buddamonk]

The colour is awesome,but i would ve painted the interior differently

 

[juttsvw]

The colour is awesome,but i would ve painted the interior differently

The interior is the same because it was a RTR truck not a kit. I just bought the hardtop and painted it to match.

 

[buddamonk]

The interior is the same because it was a RTR truck not a kit. I just bought the hardtop and painted it to match.

Wrong postsry.but great rig!

 

[project_mayhem]

Can you please post up a small review of the SV3+4600kv combo when you get it installed? Looking for some input before I buy.

 

[juttsvw]

Here are some pics of the inside.

 

[juttsvw]

Can you please post up a small review of the SV3+4600kv combo when you get it installed? Looking for some input before I buy.

Once I got the combo in the mail, I installed it in my 2wd slash to bash around a bit till i decide to put it in the JK. From what I could tell in the slash, seems to be a great system. Looking forward to being in the crawler soon.

 

[juttsvw]

 

[project_mayhem]

Once I got the combo in the mail, I installed it in my 2wd slash to bash around a bit till i decide to put it in the JK. From what I could tell in the slash, seems to be a great system. Looking forward to being in the crawler soon.

It seems like a nice combo, great price, and waterproof. I'm hoping I can gear it down for decent low end torque without too much cogging. If not, the sv3 will run a brushed motor too.

 

[juttsvw]

Thinking I might just keep this SV3 combo in my Slash and pickup another one for the Jeep. System doesn't get hot after 3 packs running hard.

Heres the other Beast i'm working on "thumbsup"

 

[juttsvw]

Just ordered the RC4WD Bulldog 9300XT Wireless Winch. Do yo guys wire the controller box right to the ESC power or do you guys get a Y harness?

 

[05Fronty4x]

Just ordered the RC4WD Bulldog 9300XT Wireless Winch. Do yo guys wire the controller box right to the ESC power or do you guys get a Y harness?

There are options, but I'd probably just run it right off your battery pack.

I see you have a 6-cell NiMH pack, and the specs say it can operate on 7-cell, so you won't quite see it's full potential. Another option is to get a CC BEC and run both the winch and your steering servo off of it. This option would be best if you were running 2 or 3s Lipo and a high voltage steering servo with the BEC set to 7.4V. Finally, you can get a small 2s Lipo if you'd like to give the winch it's own dedicated power supply. That's probably only a viable option if you already have a Lipo-compatible charger.

What I wouldn't do is run it off of the ESC as to not overload its internal BEC.