krawls XR.....with a dash of y-town please!

[racer_zh]

Well done Jeremy."thumbsup"

do you loose some words about your magic Foamsetup in your bossclaws??

 

[Farmer]

Excellent work Jeremy"thumbsup" Very nice to see all the cool hardware. Hope to see ya soon.

Later,
Farmer

 

[GEARSCIENCE]

congrats man"thumbsup" your trophy wall must be getting pretty full:shock:

 

[ruffryder]

Wow, well done J, no messing!!! "thumbsup"

 

[sally1800]

shaved up and worn in claws

i have been running these for a few months like this and i am really lovin this tire shaved like so. keep in mind these are the same set of tires i have been running for about a year.

i took them off at ECC and the results were not favorable.

they do infact take some time to tune to your specific weight but once you hit the sweet spot they really do perform very well and are very consistent."thumbsup"

How did you shave these?

 

[53 willys]

How did you shave these?

I have done mine on a lathe with emmoery cloth(sp?) and with a dremel and with a 90* air grinder and sanding disc.....the lathe and the dremel are propbaly the cleanest...the 90* grinder and sanding disc is the fastest..i'm wondering how others are doiing it too???

 

[krawlfreak]

90* die grinder with a brown scuzz pad for removal...then a belt sender with 120 grit for cleanup.

 

[53 willys]

90* die grinder with a brown scuzz pad for removal...then a belt sender with 120 grit for cleanup.

funny...I just did a set not 5 mins ago...I cut all the lugs off with lexan cutters and then used a 90* air grinder with some 120grit pads I just found...they made for a really clean sidewall....and it was fast!8)

 

[krawlfreak]

getting ready to visit the oregon/washington boys and giv'em a run for their money at the goldendale event!:twisted:

work and life have been so crazy all my cars are still packed from rojas:shock:

 

[ROWDY RACING]

I thought you ditched the knuckle weights on the XR?

 

[krawlfreak]

I thought you ditched the knuckle weights on the XR?

man! must have put the wrong pic....


oh well the knuckle weights are in fact not on the truck!

you guys are too fast:lmao:

 

[ROWDY RACING]

Give em hell at Goldendale! "thumbsup"

 

[jamesdicken]

getting ready to visit the oregon/washington boys and giv'em a run for their money at the goldendale event!:twisted:

work and life have been so crazy all my cars are still packed from rojas:shock:

can i make sweet sweet love to your charger?

 

[Almighty Malach]

Do work buddy"thumbsup" wish I was joining you up there.

 

[Diamond D]

getting ready to visit the oregon/washington boys and giv'em a run for their money at the goldendale event!:twisted:

work and life have been so crazy all my cars are still packed from rojas:shock:

Alright lookin forward to it. "thumbsup"

 

[Harvo]

Are your batteries in there somewhere or do you carry them in something else?

 

[krawlfreak]

Are your batteries in there somewhere or do you carry them in something else?

Here is the right pic.

 

[Harvo]

Here is the right pic.

Thanks for the pic. "thumbsup"

 

[krawlfreak]

the teardown!


she has had a very hard few months, so a teardown is in order. the goldendale event was a mess and i think she has a few bugs to work out before nats!

when i say a mess between the three trucks a had 4 hhk big wire motors destroyed from the silt, an fxr constanly losing calibration, some weird noises in the geartrain of the xr, a shattered mip bell on the mini driveline, and 3 7950's beaten to the point of the shakes.

time to get to work!

first off the skins have held up very well for the entire season!

broke the carbon fiber cab (i think back at awcc) and have been running like this every since.

the lower side plates ar holding up just fine even after some serious abuse"thumbsup"

nice!

 

[ROWDY RACING]

Wow sounds like you have gone thru some equipment lately. Are the CF cabs ever going to be 4 sale?