Krazed Builds - Carbon Fiber XR10 Motor/Gear Plates

[Robbob]

They're Here!
Krazed Builds brings you Carbon Fiber gear plates for your XR10.
For those looking to shed some weight, those looking for a Vp alternative or those looking for a little bling .... These are them.



All plates take the Bigger bearings like a Vanquish plate for that added extra toughness. They fit right in to a Stock case, RC4wd case and the Vanquish case .... no modifications needed.

You will need:
(2) 5x10x4 flanged bearings 5x10x4 (FLANGED) Rubber Sealed Bearing MF105-RS
(1) 5x9x3 flanged bearing 5x10x4 (FLANGED) Rubber Sealed Bearing MF105-RS

... for EACH plate.

But for those of you with stock bearings or wishing to shed even a little more and want the stock bearings We Can cut separately for you. Just let us know and we can get those together.

XR10 Carbon FIber Motor Plates
Back in Stock !!!!!



​

 

[Robbob]

Important Installation Note​

The Vp plate modifies the screw location for your upper link mounts. It brings a button head screw to be flush with the top of the flanged bearing. We changed this on ours.

We countersink the 3mm screw hole there so a countersunk screw is used and sits below that flange. Doing this causes the head of the screw to interfere with the bearing due to its location.

you will need to file the screw head a little where it sites inside the bearing hole to allow the bearing to sit in properly. Failing to do this will not allow the bearing to seat properly causing misalignment and possible bearing failure.

Below is a picture showing where to file



After its filed and bearing is seated

 

[Robbob]

More photos and weight comparisons.







Stock Axial Motor Plate


Vanquish Plate for beg bearings


Krazed Builds Carbon Fiber Plate


No more swiss cheesing your motor plates to drop the weight "thumbsup"

 

[JeremyH]

But, I like cheese!



Nice work. "thumbsup"

 

[Robbob]

But, I like cheese!



Nice work. "thumbsup"

:mrgreen: Thanks.

 

[murali]

are compatible with the case HR? I did not understand how many plates are necessary for completaew an axle ...

 

[Robbob]

are compatible with the case HR? I did not understand how many plates are necessary for completaew an axle ...

Yes - the HR case fits on a stock Axial plate so these will fit right in.

1 plate per axle - each set is 2 plates so you can do your front and rear axles in one shot.

If you are using their plate then the bearings will drop right in also.

Hope that helps.

 

[Robbob]

Second batch in stock - Ready to ship! "thumbsup"

 

[markusgabl]

I will soon place an order

 

[Robbob]

I will soon place an order

Ready to ship "thumbsup"

 

[Stormin2u]

Pay Pal sent "thumbsup"

 

[Robbob]

Pay Pal sent "thumbsup"

"thumbsup" Will go out today.

Thanks.

 

[Robbob]

More in stock - Ready to ship "thumbsup""thumbsup"

 

[Robbob]

6 sets left - Probably wont do another run of these unless the XR makes a come back. Been a great product run.​

​

Nothing wrong with them - just slowed down enough that we think its time to blow the rest out. ​

​

​

$50 a pair ​

Shipping U.S.P.S. Priority in the U.S. is included

International including Canada is available same U.S.P.S. International Priority
International Shipping available w/customs number
​

 

[Nicklepimp]

I'm really glad I grabbed a pair of these before they ran out! I'm totally impressed with the quality of these and the link mounts. Top notch man!"thumbsup"

 

[Robbob]

I'm really glad I grabbed a pair of these before they ran out! I'm totally impressed with the quality of these and the link mounts. Top notch man!"thumbsup"

Appreciate that - Thank you!

 

[Robbob]

5 sets in stock ready to ship "thumbsup"

 

[nerby149]

free bump everyone needs these

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[Robbob]

Small batch back in stock - Probably gonna be the last batch for a while with all the other projects we got coming and projected.

Supports been great for these. Thank you everyone! "thumbsup"

 

[Robbob]

Still some left in stock .......... Last batch for a while on these as our focus is turning towards other axles. "thumbsup""thumbsup"