LOSI 1/24 Scale Micro Crawler

[Bermbuster]

Found my Christmas present. 8) I wonder if the ESC is lipo compatible? It's really neat to see a Spektrum receiver/esc combo. A grappler would be a nice touch also.

Losi makes lipos w lvc in the lipo...."thumbsup"

 

[dub599]

there are already a ton of hop ups available for this car, parts made for a micro t. parts like the motor are the same. there is a motor made by atomic hobbies called a bb2 which has ball bearings for the rotor. it is a ton faster and has a ton more torque for a 90 can motor. you can also use a brushless systems made for the losi micro t. the losi brushless motors are really high kv which we all know isnt what a crawler is looking for. but there are companies like fergaio and medusa afterburner which are lower kv and have tons of the torque we as crawlers are looking for. also looking at the parts explosion, you can just buy an extra set of c-hubs, steering knuckles, steerings links and a servo and you have 4 wheel steer, but i think that was obvious for most people. but the 4ws wont be useful for those going for the scale look. these are going to be amazing, people have been dying for a micro crawler for a long time. and its happening at such a great time. rc4wd has a much more scale metal set of axles, the t-rex nanos that should be right about the same size for those going fort the ultimate scale look

 

[KnightRyder]

Im super stoked about this crawler i have a 1/24th scale 92 toyota truck body allready in the works to make a scale tuber. CANT WAIT!!!!!!!!!!!!!!

 

[Harley]

Approximate Gear Ratios

Axles: 12:1
Trans Assembly: 11.25:1
Stock pinion: 12t
Stock Spur: 54t
Internal: 20/50

Overall final drive: 135:1 :shock: (unless I fawked up)

That high KV brushless motor out of the Micro T might not be that bad!

 

[Bermbuster]

Kyosho Mini Z bodies(Monster & Overland) will fit these crawlers.....
You can get a Jeep,Hummer, Mercedes, Ford and Dodge pick ups
Pajero, Porsche and even an Escalade...."thumbsup"

 

[pardonmyn00b]

If you have a G scale railroad this could open up a whole new world of fun.

 

[forrest225]

If anybody is interested heres the link to the atomic motor: http://www.atomicmods.com/Products/Atomic-MO-016-Micro-BB-Motor-II__14548.aspx

The guys at atomic mods are great. I do all my miniz shopping there

 

[XSRCdesign]

That is so wicked sweet "thumbsup"


Perfect time to release it also, way to get it done Losi, I'll be picking up a few

 

[squish72]

new body for it lol
http://www.atomicmods.com/Products/...ro-Baja-Body-with-Stickers-(Grey)__13767.aspx

 

[soundcolor]

well great.
Now If I wanna get that mongoose setup for my MRC I'm gonna have to re-save the money for it, as the money I already set aside for it is obviously going to be spent on this...

Way to go losi...

 

[701 Technique]

Pre-ordered mine from the LHS today. Already have the workbench micro crawler course started. Pretty excited for this little guy"thumbsup"

Any new updates on when these are going to ship?

 

[dub599]

new body for it lol
http://www.atomicmods.com/Products/...ro-Baja-Body-with-Stickers-(Grey)__13767.aspx

they dont make that body anymore, and they are out of stock

 

[NOMERCY!!]

The possibilities are endless....

 

[Jeepial]

Pre-ordered mine from the LHS today. Already have the workbench micro crawler course started. Pretty excited for this little guy"thumbsup"

Any new updates on when these are going to ship?

X2 on all that..."thumbsup"

 

[rj_dio]

Fantastic! Been waiting for this since the 1/36 Losi's came out! A must have! Heck, everywhere has rocks big enough for this! "thumbsup"

 

[hairba11]

and like usual when something new comes out, I'll wait for others to be the beta testers and break stuff and get the aftermarket running before I start looking for one.

 

[701 Technique]

and like usual when something new comes out, I'll wait for others to be the beta testers and break stuff and get the aftermarket running before I start looking for one.

I will try and break stuff"thumbsup" It's already getting pretty cold in ND and this will be perfect for some indoor crawling fun.

 

[BEELZEBOB]

Hell to the the yeas Losi.

Just another reason not to buy new kicks or go to the bars LOL

i see both my dad and i rockin these lil things lol

i hope we start gewttin aftermarket wheels, tires, bodies etc. thats rule

 

[Harley]

I am going to have to get some smaller endmills for the CNC for this little guy.

Functional beadlocks with 0-80 hardware
New Chasssis
Mount for WAY smaller servo

 

[SVEN]

I am going to have to get some smaller endmills for the CNC for this little guy.


Mount for WAY smaller servo

Why a smaller servo?